|
#1
|
|||
|
|||
Valve Stem Caps ID
I came across an old Maxwell House coffee can full of valve stem caps. There are numerous different ones but these are some I am trying to ID. Thanks, Larry
|
#2
|
|||
|
|||
1st and 3rd picture have the caps that are worth $20-50 each.
3rd picture should say Schrader on the bar ontop. Both mentioned are Good Gm 60's to early 70's assembly line installed pieces. Last edited by Enoch; 07-20-2021 at 02:13 PM. |
The Following 2 Users Say Thank You to Enoch For This Useful Post: | ||
lbnaz (07-20-2021), PeteLeathersac (07-21-2021) |
#3
|
||||
|
||||
Hi Larry,
The second photo with the USA on top of the cap is what was installed on my mid-60’s “American Racing Wheels” Torque Thrust when new. They mounted on a DILL valve stem. The last photo shows the correct cap (DILL 627) which came on both my Survivor GTO’s. I would be very interested in 4-8 Nice USA Star caps shown in second photo. Thank you, Chris. |
The Following 2 Users Say Thank You to 60sStuff For This Useful Post: | ||
lbnaz (07-20-2021), olredalert (07-21-2021) |
#4
|
|||
|
|||
Hello, yes the 3rd photo has schrader on them. I never noticed the USA on the 3rd one until you point it out. Its there almost need magnifying glass but its there. thanks, Larry
|
#5
|
|||
|
|||
I also have the style you show for the GTO wheels. Larry
|
#6
|
||||
|
||||
Hard to believe the hobby has progressed this far…wouldn’t be shocked if someone starts reproducing the assembly line correct valve stems.
Do the judges deduct points for missing originals?
__________________
|
The Following User Says Thank You to DW31S For This Useful Post: | ||
lbnaz (07-23-2021) |
#7
|
|||
|
|||
I know the NCRS judges deduct for the incorrect valve stem caps.
|
#8
|
|||
|
|||
the ones in the first pic....would you sell a set?
|
|
|