![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I have two yokes. BOTH of them have the same defect. The tabs that center the u-joint are too far apart making it virtually impossible to get the u-joint centered, resulting in vibration. I have tried GM u-joints as well as aftermarket. All same result. My Z is a blast to drive around town, but frustrating at highway speeds because of this vibration.
I need a good used or even a new yoke reasonably priced. Please be sure the locating pins actually center the u-joint. 69 and up made for straps, not u bolts, and with the seal guard. PM if you have one.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
#2
|
|||
|
|||
![]()
Lynn was looking back at wanted adds and saw no replies but 12 bolt truck are same and should be easy to find - unfortunately I dont have any at the moment if your still needing I know there are lots of old trucks in oklahoma
__________________
69 RS/Z 302 VE3 Daytona 69 Chevelle SS 396 375 69 T/A clone LS6/6 speed 90 Formula 350 |
#3
|
|||
|
|||
![]()
Wow. Old thread. I finally found one, but because the thread is so old I did not go back to announce it.
Thanks for thinking of me.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
![]() |
|
|