70 Camaro Help!

DarrenX33 · #1 03-01-2007, 05:14 AM

It appears that I am missing something here. Looks like this bracket is missing the cushion/bushing and hardware to mount to the core support. Does anyone sell this stuff? Anyone with a 70 Camaro that can shoot a pic of this area so I can see the hardware.

**Rick H** · #2 03-01-2007, 06:01 AM

Darren,
The assembly looks much like the core support bushings.

Unfortunately the main bushing with the built in washer is not made or reproduced. The other bushing without a washer that slips over the other bushing is still made my GM. I can't remember the part number but I think it ends in 159 or somthing like that.

The bolt and nut you can get anywhere. I have seen people use radiator support bushings from 67-69 Camaros.

I'll try to find the parts you need when I get home this weekend.

Rick H.

DarrenX33 · #3 03-01-2007, 06:04 AM

Rick thanks a million. While your lookin' check for a 70 heater control w/o air as well..

D

**Rick H** · #4 03-01-2007, 06:29 AM

Darren,
If you are not in a big hurry for the heater control I think I have one in my storage garage. Unfortunately there is 3 feet of snow in front of it at the moment.

Just keep reminding me.

Rick H.

CamarosRus · #5 03-01-2007, 02:48 PM

Darren, I looked through my many pics and could not find one showing the detail you need.
I thumbed through the 70 assy manual. Sec 11/13 sheet B4 shows all the parts you are missing.
www.amkproducts.com should have all the correct looking fasteners.
Rick's guidance on the bushings I have to assume is correct as he is very knowledgeable with 70 Camaros.
Curious what is problem with your current Heater Control panel
Members at www.nastyz28.com would also have parts and used original fasteners to help you, I would hope

Best wishes,

**Hotrodpaul** · #6 03-01-2007, 03:14 PM

I will take a pic of my 70 Z28 tonight and post the pic. The car has never been tampered with so I know the parts are original.

Paul

DarrenX33 · #7 03-01-2007, 04:54 PM

[ QUOTE ]
Curious what is problem with your current Heater Control panel

[/ QUOTE ]

The one that I have is incorrect for the car.

Thanks for the help everyone.

70 Forest Green Zee · #8 03-02-2007, 12:36 AM

Here ya go Darren....I'll send to your personal email also. Let me know if you need anything else bud!

DarrenX33 · #9 03-02-2007, 12:45 AM

Hmmm... Looks like a part number on that bushing.

70 Forest Green Zee · #10 03-02-2007, 05:16 AM

[ QUOTE ]
Hmmm... Looks like a part number on that bushing.

[/ QUOTE ]

Ok D....you made me feel guilty so I went back out to the garage and got the part number off the rubber bushing. Part# is 3898189 Hope this helps!

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.