14x6 JK coded GM steel wheels

CT Mark · #1 06-26-2006, 04:35 AM

I'm still looking for a set of 4 steel wheels for 1966-67 Chevy. Need a 1" offset....which would be denoted with an "A" stamped by the valve stem hole.

Thanks, Mark

**SuperNovaSS** · #2 06-26-2006, 10:50 PM

I have a set of 4 14x5 wheels off of a 66 Chevelle. They have the A stamped by the valve stem. I also have a pair of 14x5 1/2 JK wheels but there is no A stamped by the valve stem. They came out of the trunk of a 66 SS396 that had slot mags on it. Just kidding

.

Jason

Jason

CT Mark · #3 06-27-2006, 04:56 AM

Ha! You funny! Now how about finding me some wheels!!! I'll even trade the Day 2 slots for a set.

**SuperNovaSS** · #4 06-27-2006, 06:58 AM

Is there a way to tell when they have tires mounted? I have a set on one of my 66 SS cars but do not know how to tell what width they are when mounted. They do have the A stamped on them.

Jason

CT Mark · #5 06-28-2006, 06:01 AM

Jason, There will be an A or A3 on one side of the valve stem and a 6 on the other side. Let me know if that checks out and we'll try a crude measurement as a double check.

Thanks!!

Denis · #6 06-30-2006, 10:58 AM

I think I have a set dated late July 1967, off an early 68 Chevy II Nova with drum brakes. I'll have to check the codes but I'm pretty sure I remember seeing the 'A3'. PM or email me if you need them.

CT Mark · #7 07-01-2006, 03:13 AM

Thanks Denis. I just sent you a PM.

**SuperNovaSS** · #8 07-01-2006, 06:23 AM

Sorry for the delay. I did not see the 6 you were talking about.

Jason

CT Mark · #9 07-04-2006, 04:44 PM

Jason, Is the A3 on there? If so, maybe you can try measuring the width. Tough to do with the wheels on the car but if you want me to walk you thru it, send me a pm. Thanks alot!

**SuperNovaSS** · #10 07-07-2006, 05:26 AM

There is only an A. No A3.

Jason

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.