|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1968 nova subframe bushing spacer
on a 68 nova subframe there is 1/4 inch thick steel spacers on top of the bushing are these as needed or do all 4 points get the spacer
|
#2
|
|||
|
|||
Re: 1968 nova subframe bushing spacer
yes they are needed or fenders wont line up! and just the mounts under the firewall
__________________
69 RS/Z 302 VE3 Daytona 69 Chevelle SS 396 375 69 T/A clone LS6/6 speed 90 Formula 350 |
#3
|
|||
|
|||
Re: 1968 nova subframe bushing spacer
the car I am working on had them only on the bushing under the firewall I bought a 68 parts car and it had them on firewall bushing and rear bushings ?
|
#4
|
|||
|
|||
Re: 1968 nova subframe bushing spacer
I've only seen them on the frt under the fire wall. Have not seen them on all 4's on any of the 68's that we've had, but wouldn't rule it out. Probably falls in the same catagory as 68 rocker curtains. Lots of changes from early build to later.
|
#5
|
|||
|
|||
Re: 1968 nova subframe bushing spacer
the car with all 4 spacers is a 4 door car & the car that only had 2 is a 2 door car
|
#6
|
|||
|
|||
Re: 1968 nova subframe bushing spacer
Same here only seen them on the front of sub frame.
__________________
Looking for the next project. |
|
|