Oer 1969 camaro deluxe door panel hits window adjustment stud

[chevroletaddict]

I have a pair of oer 69 Camaro Deluxe door panels. The doors themselves are original to the car as well as the glass adjustment studs. I put the Clips in the sides of the panels and go to install the deluxe oer panel. The three Clips on the inside of the car where the panel rests against the kick panel insert fine but when I go to push in the three Clips on the outside of the panel closest to the door latch the door panel will not sit flat. Upon further inspection the adjustment screw for the lower track is hitting the door panel. Any suggestions as to how to fix this without cutting the stud