HEI with stock size dist. cap ?

[x Baldwin Motion]

I switched the motor from my 65 Chevelle to the 69 Nova. I had an HEI dist (mid 80's style)on the motor and there is no clearance for this in the Nova. Is there something smaller I can use or do I have to go back the points distributor?

Thanks in advance for your help.

[RPOLS3]

If you have to go back to points distributor due to size constraints but don't want the points - you can install an electronic conversion kit from somewhere like Lectric Limited. All fits under stock cap, no other wires protruding, etc. Not the cheapest solution maybe but.....

http://www.lectriclimited.com/mainpage.htm

[Plowman]

You will have to get new wires,or MSD small cap for HEI wires is the best.

[Chateau Slate 66]

I have the Pertronix II in my stock distributor and it has been great. Another option is Dave's small body hei conversion in your stock distributor. I have not used him, but others seem to like his stuff.

http://www.davessmallbodyheis.com/

[x Baldwin Motion]

Thanks for the input!

[Unreal]

I got a Dave's unit, and I like it because the components are available at any auto parts store. He does have to machine the underside of the body to square it, so don't use a "special" core. I bought one for $5 and sent it to him for modification.

[Chevy454]

You can make a small body hei using either an MSD (if you want billet) or Chrysler (if you want widely available & in stock at parts stores) reluctor, and then a magnetic pickup (MSD is best bet)...it sounds a lot harder than it actually is. The only machining needed is to knock down the lobes on the shaft so the reluctor will fit over it...then, just hide your MSD box and your golden.

[WILMASBOYL78]

I use the Crane Fireball in a regular Chevy points distributor and it works fine. Adjustable rev-limiter...never had a problem.

wilma

[Chevy454]

[ QUOTE ]
I use the Crane Fireball in a regular Chevy points distributor and it works fine. Adjustable rev-limiter...never had a problem.

wilma

[/ QUOTE ]
A few of the guys in the Pure Stock circles have had problems with the Crane pieces, specifically the rev limiter (cutting in too early, or sporadically throughout the rev range, etc)...

[Salvatore]

[ QUOTE ]
I use the Crane Fireball in a regular Chevy points distributor and it works fine. Adjustable rev-limiter...never had a problem.

wilma

[/ QUOTE ]Adjustable rev limiter!!!!! What in your lawn tractor? You don't go over 3,500 rpm's anyway!