Figured I'd update this thread since its been a few months.
Photo 287 - 289 - Finally got the master back from White Post and I assembled the components.
Next I decided to bounce back and clean up the cowl panel & wiper transmission.
Photo 290 - 291 - Panel & linkage before cleaning.
Photo 292 - 295 - After cleaning, Meguiars #7, wet sanding with 2K, Meguiars 105 & 205, and Meguiars #7 again.
Photo 296 - 298 - screws, squirters and cowl seal added after they were cleaned.
Photo 299 - 302 - Lastly are details on the wiper transmission linkage after cleaning.
|