View Single Post
  #133  
Old 01-17-2023, 01:56 AM
cook_dw cook_dw is offline
Banned
 
Join Date: Oct 2003
Posts: 4,322
Thanks: 623
Thanked 1,487 Times in 609 Posts
Default

As I mentioned previously, I’ve been working on the upper cowl cove removing the black spray bomb and primer applied over the original paint. I’ll be honest, this was one of the most time consuming parts of this project. Working with anything from lacquer thinner, xylene, to sanding with 1k, 2k etc but ended with the best results using a blade razor blade and a plastic razor blade scraper. Then going over it with a green scotchbrite and lightly rubbing the areas after using the blade to get down to the white. As you can tell this was a trial & error process. After it’s all said and done I’m pretty happy with the results.

Photos 442 - 444 - before photo and during the process of the cowl area.

Photos 445 - 451 - After. If there were still any Doubting Thomas’ out there as to whether or not this car was a real Z I think this should clear any concerns.
Attached Images
         

Last edited by cook_dw; 01-17-2023 at 11:45 AM.
Reply With Quote
The Following 4 Users Say Thank You to cook_dw For This Useful Post:
dykstra (01-18-2023), napa68 (01-17-2023), olredalert (01-17-2023), RPOLS3 (01-17-2023)