FWIW - the originals are printed on metalized Beer Bottle label stock which has some wet strength.
The printing process is flexo or direct impact using a flexible image plate to directly print onto the substrate - you can tell this by the "squish out" leaving the centers of the letters showing substrate and the edges looking heavy... this is from the printing plate touching the surface and pushing the ink away from the impressed area. When the plate draws back it leaves the "kiss".
Offset printing uses a printing plate to transfer the image to a carrier blanket and the blanket transfers the image to the substrate, - this process uses much less ink per sq inch and thus produces a much crisper image- it typically shows as tiny little dots under a loop - the number of dots per inch is the "screen" resolution.
I sold pulp, paper, paperboards, and ultimately printing 20+ years ago.
__________________
~JAG~
NCRS#65120
68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car
#21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built.
71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist.
NUMEROUS Lemans blue Camaros,
Monza Red and Daytona Yellow Corvettes
& a Chevelle or two...
Survivors, restored cars, & other photos
https://picasaweb.google.com/lh/myphotos
Last edited by firstgenaddict; 08-30-2021 at 03:04 AM.
|