View Single Post
  #1  
Old 09-26-2016, 01:11 AM
JBALL JBALL is offline
Yenko Contributing Member
 
Join Date: Sep 2013
Location: Cincinnati, Oh
Posts: 330
Thanks: 513
Thanked 93 Times in 38 Posts
Default 1968 Camaro wiring issue

I have an issue with my '68 Camaro and was wondering if anyone here might have an idea as to what's wrong.

Background:
Took the car for a quick spin around the block. Stopped at a light and when it was my turn to go, I took off fine.. shifted into 2nd and lost all power..

After a ride on the roll back, the car is back in the garage.

Things I tried:
Replaced the coil - No good
Replaced the MSD 6AL box no good
Checked the magnetic pick up in the distributor with an ohm meter, and it seems to be in spec.
Replaced the rotor button. Was quite crispy

Checked the fuse box and found that the fuse marked "dir sig" and "back up" fuse was blown. The red ignition wire from the MSD box is plugged in to a terminal to the left of this. Replaced the fuse and soon as I turned the key it popped.

I moved the red MSD wire to the accessory terminal and now I have spark at the coil. Car still will not start. Turns over fine. The fuse glows red and blows as soon as you hit the key.

I'm at a loss.

Any ideas would greatly be appreciated.

Thanks,

Jason Ball
__________________
COPO 9561 X-44 Fathom Green
Reply With Quote
Click here to view all the pictures posted in this thread...