Re: Diverter Valve Rebuild Source Needed,... I Thi
The system is stock with full functioning smog pump with the guts intact. I routed the 1/4 inch hose from the back of the diverter valve to the side nipple on the side of the quadrajet carb on the passenger side. The kit also came with a white "T" but I didn't know where that went. There is also a 1/4 hose that runs from the back of the intake to the distributor vacuum advance. Should I "T" off of that?
As to when it makes the back-fire/ popping noises, my car is a 4sp and when I wind out first and shift to second I hear the noise. Also if I'm going down a steep hill and coast in gear at speed down the hill I hear it as well.
|