Re: Bad clutch
[ QUOTE ]
I have a set of pins that I made by cutting the heads off long bolts. I don't have the measurements here but I can get them when I get home. They thread into the bellhousing and leave a smooth surface. Once you get the tranny up on the pins it's aligned and you can slide it into place easily. I also have an extra yoke so I can turn it and slide at the same time. Works great on my BB Camaro.
[/ QUOTE ]
Hey Martin, I like your idea. Simple but effective. Cut the head off of 4 bolts, 4 inches long X 1/2 (I think) thread size. Thread them into the bellhousing a few turns and slide the trans in (or out). My trans/bellhousing is coming out for some cleanup and repaint after the season is over. I will give your idea a shot.
|