Moving forward, motor and transmission are bolted in place. The transmission crossmember is bolted in place with recessed nuts (never a good thing!
) that allow the crossmember to be removed if needed. I'll finish weld the rest when I strip the car back down.
I finished the steering wheel hub modification to allow the wheel to sit flush on the column. This 18" wheel is very similar to the 507 wheel and once I add the horn ring and reliefs, should be an almost perfect match.
Dash bolted in place. Now that the column is in again I can finish the steering linkage and the car will be able to roll and steer!! Might have to pull it out to get some better pics.
More to come
Cheers
Dave