It's made of ABS plastic. I've used common ABS pipe cement several times to repair these. It holds well. Also, ABS dissolves in acetone. You can use it to bond ABS. I've used acetone to bond ABS parts that I made on a 3D printer. As always, experiment on scrap parts first.
If you have one that is completely scrap you could cut small pieces off of it to bond to the back side of the crack to make it stronger.
__________________
Freddie
1969 Camaro RS/SS396 (427) 4 speed
Last edited by big gear head; 01-17-2021 at 05:20 PM.
|