View Single Post
  #222  
Old 03-20-2020, 12:16 PM
cook_dw's Avatar
cook_dw cook_dw is offline
Yenko Contributing Member
 
Join Date: Oct 2003
Posts: 4,388
Thanks: 672
Thanked 1,725 Times in 660 Posts
Default

Quote:
Originally Posted by A12pilot View Post
Attention all Users: Attention all Users:

A breakthrough has been discovered! Sitting Reserve in Miami with absolutely nothing to do except listen to the Corona-Clueless scrounge for TP, I decided to take a road trip up to The Villages to see my folks. Driving up with the dash and engine harness diagrams floating through my head from hours of staring at them, I called M&H and chatted with Joe (I think....I know it wasn’t Tom). So explaining to him my entire situation from start to finish, we methodically went through every situation that it “could” be. I’d present a scenario and he would debunk it with the diagrams. He’d present a solution and I’d describe why that isn’t possible with the wiring diagram in my head and the symptoms my car had, to which he’d agree. This went back and forth with some extremely intelligent banter the likes of which haven’t been heard since the Carter Administration. This hour long conversation puzzled him, puzzled me, puzzled the government phone tap guy that was listening on the other end, and ultimately made us both think we came up with the issue with concurrence from the phone tap guy who said “that’s it!” in a very soft and muffled voice

I have to use the voltmeter and test one wire when I get home which will confirm our assumptions. We’re confident that this will be it!!! Which means out comes the dash harness and back to M&H it goes to be reworked. There’s one, to possibly two, wires in the harness that are spliced incorrectly which is sending power where it doesn’t need to go and grounding out the system intermittently. We touched on it briefly in the thread and Darrell gets the trophy with his mention of the “key in buzzer” option. My car doesn’t have that option installed but the connection is in the harness. The wire that powers that option is the culprit along with the tach lead wire, and oil pressure sending unit lead, and coil wire. Yes, it is THAT complicated!!! I’ll confirm Saturday when I get back and have a better explanation, but I think the eureka moment has come!!!

Cheers
Dave






Hope that's what it is..
Reply With Quote