Polish the axles and nail heads, Polish the wheels, inside the axle area and sand the "tread" area. You may want to crown the wheels just a little. Get an alignment ruler and make sure that all four are painted in the same direction. Have one of the wheels barely making contact with the track. If you can get by and they won't tech for it, you can have one of the wheels up in the air. Use the very fine graphite and run the wheels in it for several runs. I even went so far as purchasing a practice track. Contact me if you have any questions. My cell is 816-654-3400.
__________________
Snarl softly and carry a big stick!
1969 Hurst/Olds
13.26 @ 103.12 Pure Stock
Rusty Small
|