Re: New Yenko Owner needing some help!
OK -- heres what you need to do ... the connector at the base of the column on top, check the wires and match up the colors. I am thinking that if that switch in the column was replaced (or column replaced) and not the right one for a Nova that could be the issue. If colors match up according to the diagram I would say the switch is bad. No hazard/signal lights, no horn all point to the switch. Have you jumped across the horn relay to see if the horns are good?
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know!
|