New here, I need good info on verfying a copo
 

Hello all, I joined today in hopes of getting good info on copo's. I have a friend that has asked me to ride with him this weekend to look at a COPO , Now I know quite a bit about decoding chevelles, BUT NOTHING ABOUT COPO'S, ANY help would be great. The car we are going to look at supposably has been in the same family for 15 yrs, and the guy has told my friend he can put us in touch with the original owner, also he says he has some paper work. NOW outside of me seeing a build sheet, im wondering if there are any "things to look for" that may help aid in determining if this is in fact a true copo. The car doesn't have a engine in it, so block numbers are out. My buddy tell me the car can be bought for around 45-50k. PLEASE GIVE US YOUR "2CENTS" WORTH.! Mike

Re: New here, I need good info on verfying a copo
 

For sure grab the rear end code and complete trim tag information...and of course look for the same clues as on an L78 (3/8 lines, power discs, etc.)...depending on how thorough a search you're allowed to do, try popping the back seat out, or even the front seat(s), and look for a build sheet...

Re: New here, I need good info on verfying a copo
 

Thanks Rob! good info! I will do !
Mike

Re: New here, I need good info on verfying a copo
 

Is this a Chevelle or a Camaro?

Re: New here, I need good info on verfying a copo
 

Camaro

Re: New here, I need good info on verfying a copo
 

VIN too, of course.

Re: New here, I need good info on verfying a copo
 

If you are uncomfortable about posting the vin then I suggest sending it in a PM to Kurt S.