Voltage Regulator rebuild: '69 Chevelle
 

Looking for a reputable rebuilder. Thanks.

Re: Voltage Regulator rebuild: '69 Chevelle
 

Pirkle in GA he also does alternators, starters and horn relays. If no one has posted his # by tomorrow I will. I have used him for well over 20 years and always with great results.
Rich.

Re: Voltage Regulator rebuild: '69 Chevelle
 

[ QUOTE ]
Contact Us: (706) 860-9047



[/ QUOTE ]

John Pirkle

Re: Voltage Regulator rebuild: '69 Chevelle
 

An ALTERNATIVE. It looks original and it has updated technology!

Ed

Re: Voltage Regulator rebuild: '69 Chevelle
 

[ QUOTE ]
An ALTERNATIVE. It looks original and it has updated technology!

Ed

[/ QUOTE ]

Ed, this is essentially what I did to get by until I have my regulator rebuilt. My problem started with me overcharging my battery which caused a minor acid spill https://www.yenko.net/ubbthreads/imag...emlins/mad.gif . I then contacted my local Napa store. Fortunately, the manager has a '71 LS5 'velle and he immediately turned me on to the solid state solution. Cost me $48.00 though https://www.yenko.net/ubbthreads/imag...lins/crazy.gif . The original Delco Remy cover fits nicely over the new replacement base, altho I had to drill out the rivets holding the cover on the solid state replacement. The foot print of the base aligned perfectly with the radiator support holes. Not surprisingly, the solid state components take up about 1/20 of the space of the old technology voltage regulator. https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif

Thanks to all for your input. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Voltage Regulator rebuild: '69 Chevelle
 

$48 BUCKS.... https://www.yenko.net/ubbthreads/imag...ns/shocked.gif These were a little under $10 at Auto Zone.......


Steve