1969 Camaro front fender engine number location?
 

I have seen several different front fender engine emblem locations. Are they sapose to be perfectly level with the side marker light or just slightly below?

Thanks Doug

Re: 1969 Camaro front fender engine number location?
 

Doug,

You are correct. I have seen it both ways as well. I did
some checking and here is what I came up with. In the 69
factory assembly manual, it shows the stripe break in
relation to the side marker hole and calls for a 0.300 gap
from the top of the side marker hole to the top of the
break in the stripe. The bottom measurement is called out
as 0.270 ( reference ). This is most likely due to
manufacturing tolerances in the side marker hole stamping.

http://webzoom.freewebs.com/nuch_ss3...pe-details.jpg

The emblem was centered in the stripe break. In all honesty, 0.030 doesn't amount to spit where emblem placement
is concerned. +/- 1/32" is probably normal for emblem
placement.

Steve