L88 vs. LS6
 

I have both and i'm taking opinions on what you guy's think is the better & more valued motor? The L88 is a 512 with 074 heads all dated in jan. 71. The LS6 is a 512 with 026 heads all dated feb. 71. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: L88 vs. LS6
 

Without doubt, I'd go with the L-88. An LS-6 is pretty stout in it's own right but in the end, it was still designed as a heavy, cast iron headed street motor. On the other hand, an L-88 is a purebred race motor that will literally try to tear your head off. You can also never go wrong by removing 75 LBS from the nose of your car with the aluminum heads. Faster and lighter, the choice is obvious.

Re: L88 vs. LS6
 

I have to agree with Mark!!! The L88 would be my choice to run in a car. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: L88 vs. LS6
 

With exhaust manifolds, it's gonna be a toss up between the 2...the L88 has a better intake but is down on cubes, but the LS6 makes good use of the 27 extra cubes but the intake is a killer...but with headers I would put my money on the L88...

Re: L88 vs. LS6
 

In '69 Beare Motors sold 3 COPO Chevelles and an L88 Corvette. Our salesman got to test drive these cars and didn't see much difference performancewise. Closed exhaust really seems to choke the radical cammed engines. One thing for sure, The L72 and LS6 are pretty mild mannered around town. If you are doing much driving, low octane pump gas can get to be a problem and won't work at all with the L88. Our L78 seems to work fine on the 92-93 octane gas that we have around here. The Clarys can show you how to make your engine produce some real power. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: L88 vs. LS6
 

Wow ,some great responses so far. It will have an aftermarket intake & headers & it would be nice to drive it on the streets some. Trying to make a choice so i can go ahead & send out the motor.

Re: L88 vs. LS6
 

I had this conversation with a friend last weekend while at the NCRS judges retreat in Dallas.
He's considering an LS6 Corvette vs. an L88 Corvette. Although the LS6 is a 454 and it is an extremely rare engine option, the L88 is just a buzz word for high performance. The 427 engine is so well known and it was raced in NASCAR well into the '70's. It was a good engine and that L88 hood is just wicked looking. With real L88's not selling for less than $200,000 now, it's apparent that they're popular. By the way, there will be 20 to 50 L88's at the NCRS Nationals in San Antonio in August. If you like L88's, come to San Antonio to see the largest collection of L88's ever assembled.

Re: L88 vs. LS6
 

Why not a 1971 LS-6? Uses most of the HD components of the L-88 and is just as scarce as production L-88's. With the swap of the low compression pistons to a higher compression piston, and no other changes, the engine dynoed at 493hp in otherwise stock configuration.

Re: L88 vs. LS6
 

Tim,

-------You would have loved the power curve in my old LS6 Vette. It had a 3:55 gear and just pulled like a freight train from about 3200/3500rpm all the way to redline. A bone stock 1969 L88 with the original 2 inch exhaust would get an a$$-whoopin from a well tuned LS6 with that same 3:55 gear. Thats my opinion and Im stickin to it.........Bill S

Re: L88 vs. LS6
 

But, put a tune on that L88 and the LS6 is gonna see taillights! https://www.yenko.net/ubbthreads/imag...mlins/grin.gif HA!

While not an L88, we've had several L72s as well as an LS6 or two...around town, LS6 has more down low which makes it easier to lug around and show off at the drive-in. But in a straight line, they definitely don't spin up the way an L72 does...our L72 and LS6 were set up exactly the same, and while the LS6 made excellent power, it took it a *skoche* longer to do so and couldn't make it as high...I loved my LS6, don't get me wrong...only thing wrong with that car was that every where I went *EVERYONE* had a red w/black stripes '70 LS6 Chevelle...whether it was real or not!