1969 Nova rear leaf springs
 

Am trying to dteremine what is the correct number of leafs in the rear springs of a 1969 369/375 Nova. 4-5-? Also, once determined, will need a good original set. Thanks; Tom

Re: 1969 Nova rear leaf springs
 

Tom
The Novas used the 5 leaf rear springs with 'concealed' anti-squeak pad pockets. They are not too hard to find, but decent sets will cost around $200+ and then might still need to be re-arched. I understand that Ron Norman is selling very nice repros if you'd like to investigate that option.

You will also need the non-F41 lower spring brackets, only the F41 version is currently available from GM. The F41's can be used, but you would have to hack or burn off the sway bar extension.

Re: 1969 Nova rear leaf springs
 

Marlin; Thanks, I just got off the phone with Ron, he has given me a couple of ways to go. Should be able to help. I had already spoken with Wayne, he had the info, but no springs. Tom

Re: 1969 Nova rear leaf springs
 

I have the right hardware, off of the Yenko, just a couple of springs were very rusty. Since Rob plans on racing the car, I figured I better have good parts. Tom

Re: 1969 Nova rear leaf springs
 

Tom;
What were Ron's suggestions? I might need a set for my '69 SS project.

Re: 1969 Nova rear leaf springs
 

Marlin, Ron is checking on a good used set. Also, he has had sets reproduced in the past, sold out, but may do another batch. I will keep you posted. Tom

Re: 1969 Nova rear leaf springs
 

Does anyone have a pic of the original style leafs?

Re: 1969 Nova rear leaf springs
 

I've used the repop springs from Ron N. they are very nice. Fit well, and have a good arch. Better than any others I've found. I like the coating that comes on them too. I think it is close to what was used on original cars including the frt sub frames. I hope they continue to produce them. I'm gonna need a couple of sets.

Re: 1969 Nova rear leaf springs
 

[ QUOTE ]
I've used the repop springs from Ron N. they are very nice. Fit well, and have a good arch. Better than any others I've found. I like the coating that comes on them too. I think it is close to what was used on original cars including the frt sub frames. I hope they continue to produce them. I'm gonna need a couple of sets.

[/ QUOTE ]

Do the spring ends look the same as the originals? As I recall,
originals were somewhat squared off on the ends of each leaf.
I'll have to contact Ron myself. How about the ride height?

Nuch

Re: 1969 Nova rear leaf springs
 

Clue me in on who Ron is please. Bodywork is almost done on my 70 and it will soon be time for paint and suspension.