The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Ebay & other seen ads section (https://www.yenko.net/forum/forumdisplay.php?f=139)
-   -   '70 Monte SS454 / 4-sp / Build Sheet (https://www.yenko.net/forum/showthread.php?t=184355)

scuncio 01-10-2026 10:31 PM

'70 Monte SS454 / 4-sp / Build Sheet
 
I don't believe any 4-speed SS454 Montes were built, and I can't read the build sheet well enough to discern all the lines, but I'm assuming it shows it was originally equipped with a TH400. Looks like the original engine is also long gone and has been replaced with a more modern BB based on a Bowtie aftermarket block.

Link to 1970 Monte SS454 eBay auction
*Note: When you click on this link and make a purchase, I may earn a small commission from eBay. These commissions help to provide financial support for the sYc.

https://i.ebayimg.com/00/s/OTU5WDEyO...7.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDEyO...7.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDEyO...7.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDEyO...7.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDEyO...7.JPG?set_id=2

138570L126063

SuperNovaSS 01-11-2026 06:19 AM

It almost looks like someone wrote over the printing on the build sheet to make it stand out. If so, a mistake in my opinion.

Jason

luzl78 01-11-2026 12:31 PM

Conveniently over the turbo 400 designation.

BLACKLS5 01-11-2026 01:08 PM

Doesn't the "CR" in the trans block of the build sheet tell us something?

luzl78 01-11-2026 01:17 PM

You are 100% correct. Forgot to look at that.

Mr70 01-11-2026 01:52 PM

This Monte has been well known for a while now to have been modified & not as advertised.

olredalert 01-11-2026 10:26 PM

----Obviously a built Monty, but I really like it. I would love to drop an after market factory style shifter handle in there, just to confuse people more. For me the exhaust is a mess, and there are a few other issues, but how much fun would it be, especially if even a bigger engine was added. Something like my 93 Suburban's 510 cu/ 570hp/ 650 ft/lb killer....Bill S


All times are GMT. The time now is 03:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.