The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Chevrolet (https://www.yenko.net/forum/forumdisplay.php?f=124)
-   -   1971 Corvette Hot Rod Build (https://www.yenko.net/forum/showthread.php?t=181502)

Arrowsmith 02-26-2025 01:50 PM

1971 Corvette Hot Rod Build
 
My NCRS Top Flight '71 Corvette has been in my hands for a week. I've had a chance to go over it and figure out what I'm doing. It became crystal clear the car has to come apart. Not only were the fasteners loose on the rear camber adjusters, the left hand exhaust is falling off loose, some of the bumper bolts are loose (ditto with a number of other parts -- some critical), the shocks (original) are soft, the steering box weeps at the pitman seal and car wet itself..:) ....the rear main seal leaks. This explains the wonky clutch. In the end I found roughly 3 dozen things that need attention and I haven't had the car up in the air long enough to have a really close look.

With that in mind, I've decided to blow the thing apart and check everything. And while I'm at it, the plan is to build it into a mild, stock appearing hot rod.

Given that plan, I'll have a pretty good chunk of original parts for sale down the road. That includes an engine, two sets of wheels and tires (one set 1971 correct with almost new 54 year old tires), interior parts, exhaust parts and so on. If you have a "want list", keep me in mind!

Here we go....

https://i.imgur.com/N3zSQGHh.jpg

https://i.imgur.com/L4LGbVOh.jpg

napa68 02-26-2025 02:23 PM

So how big it going to get????????

Brezinski always had a nice "stock" appearing cylinder head package

69M22Z 02-26-2025 02:25 PM

Cool!!

Arrowsmith 02-26-2025 02:30 PM

Quote:

Originally Posted by napa68 (Post 1667131)
So how big it going to get????????

Brezinski always had a nice "stock" appearing cylinder head package


The plan is to clone my old LS6 car from way back when...:)

Arrowsmith 02-26-2025 02:34 PM

Little addenda:

I hold absolutely zero animosity toward the original restorer. The cosmetics on the car are outstanding. He did the very best he could with his abilities, his tools, his knowledge and his shop equipment.

He knew there were mechanical issues with the car and pretty much told me that. I just didn't know what they were and perhaps he didn't either.

It's all part of the hobby. And I love spinning wrenches.

W

AnthonyS 02-26-2025 03:15 PM

I'm going to be following this too, yay!
Anthony

Arrowsmith 02-26-2025 03:24 PM

Quote:

Originally Posted by AnthonyS (Post 1667136)
I'm going to be following this too, yay!
Anthony

Thank you! It will be slow going. I have to be double careful here because of the cosmetics (top and bottom). :). So please bear with me?

Xplantdad 02-26-2025 03:28 PM

Quote:

Originally Posted by Arrowsmith (Post 1667133)
The plan is to clone my old LS6 car from way back when...:)


Awesome! :drool:

dykstra 02-26-2025 03:52 PM

Subscribed!!

jerry455 02-26-2025 04:06 PM

Bold Plan!!
Going with a "Day Two" look underhood or stealthy stock look?


All times are GMT. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.