firstgenaddict |
05-17-2021 10:49 PM |
1 Attachment(s)
I will relay that the 156 bushings were being reproduced correctly (diameter IIRC 2", height, sleeve configuration, etc the only difference was there is not a raised part number.
They were being made by the manufacturing company which Rick - from Ricks Camaro's set up as a manufacturer in order to supply RICKS as well as other Camaro parts houses with various parts. The other company was on the other side of the parking lot from the Camaro parts warehouse in Athens GA.
Here is a photo of the bushing I was referencing. I used them on the lemans Blue car I restored 10 years ago. The upper cushion is an original with the raised writing on them.
|