4-speed tunnel
 

Hoping someone has a factory 69 Camaro 4-speed tunnel that I can use to repair my tunnel. The measurement starts at the front of the seam. Thank you!

Are you asking for measurements or an actual tunnel to patch yours with?

an actual tunnel to patch mine with. The measurements are shown so you can see how much of the tunnel I need.

I may have what you need. I will check when I get home
Scott

Gotcha. I have my original tunnel, but it's not for sale. What I did was torch cut the hole when I put a new floor pan in. Have you thought about just using a blank patch and cutting the hole yourself?

Original on the left:

https://farm1.staticflickr.com/301/3...58516e0b_b.jpg20150522_164311 by Dave H, on Flickr

https://farm6.staticflickr.com/5614/...679c2740_k.jpgIMG_20160605_202647 by Dave H, on Flickr

Yes I have. If nobody has one I might have to do that. Thank you.

Johnny, Here is one I have, I thought I had a 4 speed tunnel but it's MIA
https://s19.postimg.org/5s8vtzrz7/20180208_162249.jpg
https://s19.postimg.org/ulifunipf/20180208_162254.jpg
https://s19.postimg.org/lqhlk6bxf/20180208_162301.jpg

Scott

Scott, thanks for checking! John

No problem bud!

Scott

I have a few tunnels I removed from both auto and 4 speed cars
I can send picts this weekend
Please text me your contact info

Regards,

Fred