Big block Hardware thread original
 

This Thread will be all original big block Hardware removed from several original Motors. Some small block Hardware thrown in but mostly big block. First up rbw with dimple big block fuel pump mounting bolts. 50 shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.06.50.jpg
https://www.yenko.net/ubbthreads/pics...9_20.06.40.jpg

Re: Big block Hardware thread original
 

Distributor hold down clamp and bolt to your head marking period the plate for the clamp is unique on The Originals it has a raised pad on the top. 40 shipped to the lower 48
https://www.yenko.net/ubbthreads/pics...9_20.06.29.jpg
https://www.yenko.net/ubbthreads/pics...9_20.06.11.jpg

Re: Big block Hardware thread original
 

Flanged head coil mounting bolts E. 30 shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.07.12.jpg
https://www.yenko.net/ubbthreads/pics...9_20.07.01.jpg

Re: Big block Hardware thread original
 

65-68 Short water pump alternator mounting hardware, 65-74 Corvette.
A lower pivot bolt
3 A triangle bracket to block bolts
1 RBW upper bolt
1 WB top adjusting bolt star washer and flat washer. 75 shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.05.59.jpg
https://www.yenko.net/ubbthreads/pics...9_20.05.48.jpg

Re: Big block Hardware thread original
 

Short water pump mounting hardware3 TR bolts and 1 AIR Stud 75 shipped to the lower 48. https://www.yenko.net/ubbthreads/pics...9_20.04.31.jpg
https://www.yenko.net/ubbthreads/pics...9_20.04.18.jpg

Re: Big block Hardware thread original
 

Small and Big block motor mount to block bolts RBW 60 shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.05.13.jpg
https://www.yenko.net/ubbthreads/pics...9_20.05.02.jpg

Re: Big block Hardware thread original
 

Big block balancer bolt O perfect condition 50 shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.04.51.jpg
https://www.yenko.net/ubbthreads/pics...9_20.04.41.jpg

Re: Big block Hardware thread original
 

65- M-69 crank pulley mounting bolts for cast iron pulley RBW. 30 Shipped to the lower 48.
https://www.yenko.net/ubbthreads/pics...9_20.02.15.jpg
https://www.yenko.net/ubbthreads/pics...9_20.02.04.jpg

Re: Big block Hardware thread original
 

Starter mounting hardware
2 O starter to block bolts
1 E starter brace to block bolt
50 shipped to the lower 48. https://www.yenko.net/ubbthreads/pics...9_20.02.54.jpg
https://www.yenko.net/ubbthreads/pics...9_20.02.44.jpg

Re: Big block Hardware thread original
 

Small + Big block fan clutch to water pump hub mounting bolts AS 40 shipped to the lower 48. https://www.yenko.net/ubbthreads/pics...9_20.05.36.jpg
https://www.yenko.net/ubbthreads/pics...9_20.05.25.jpg