![]() |
Chevelle Vinyl Top Trim hardware?
<span style="font-weight: bold">On a 70 Chevelle how is the trim on the 1/4's and Dutchman panel secured?
Did Vinyl top cars have those nail heads spot welded on them at the factory to attach everything? I looked at a 70 yesterday that was born with a V-top but since removed and found no evidence of it looking up into the 1/4's and under the Dutchman panel so was curious. Thanks Ron</span> |
Re: Chevelle Vinyl Top Trim hardware?
Not one person knows if a Chevelle has those nail head rivets to secure the vinyl top trim or another method?
|
Re: Chevelle Vinyl Top Trim hardware?
Rick Nelson in Pleasant Plains , IL., is a Chevelle expert, check with him, I bet he will know.
|
Re: Chevelle Vinyl Top Trim hardware?
Yes, there are rivets and plastic clips until you hit the rear corner trim and end spears before the door. Both of those are thru holes. I've removed many many sets....
BIG |
Re: Chevelle Vinyl Top Trim hardware?
Thanks Big so I guess that's why I saw no evidence in the trunk of mounting hardware.
This particular car had such bad fitment between the trunk lid and quarters that it had me thinking the 1/4's may have been heavily repaired or replaced. Ron |
Re: Chevelle Vinyl Top Trim hardware?
Ron,
Definitely held on with nail head studs that were welded onto the panels except the die cast corners which are bolted down through the panels as well as the end spears. Chris |
Re: Chevelle Vinyl Top Trim hardware?
Thanks everyone for the help. Although I'm a Mopar Guy I always loved 70 SS so now that my buddy wants one I'm trying to get better informed!
Ron |
All times are GMT. The time now is 02:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.