GM SBC 3 deuce intake carb set-up. Whats it worth?
 

Looking for a little help. What is something like this worth? Suposed be be off an early corvette. Going to look at it today. Complete set up including linkages?

Thanks Jason

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

Jason,

I am not aware of any 3X2 intakes used in production on SBC. Only BBC. Early Corvettes did use 2X4 from 56-61.

Tim

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

There was a very short run of Winters castings 3x2 manifolds that were fit for three Holley two barrel carbs as a trial to see if it would work for a Trans Am Camaro. The odds that this is one of them about equals that of getting a winning lottery ticket, but still possible. If that should happen, you want to own it..... [img]<<GRAEMLIN_URL>>/naughty.gif[/img] .....at almost any price. Oh, the Holley carb numbers that they used don't show up on any normal lists either.

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

In the 50s and 60s, they made three aluminum duece Stromberg (sp?) kits that were very popular. I had one on my 56 Chevy and it ran stronger than a single four barrel. I never had any problems with it. Base price may be 300-500. If you don't have any luck with them, keep me in the loop. *Paul

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

Well I bought it. What a cool day 2 piece. It is complete. The guy I bought it from had it on his 60 chevy. He said it was GM? But I couldn't find the winters mark on the intake. It has 3 rochester 2 jet carbs on it. I also got a pair of corvette 7 fin valve covers with the stagered holes. A NOS delco dual point distributor, still in the delco box. Also a set of 57 vette fuel injection emblems in the GM boxes. These three things will be for sale in the for sale section later on tonight.
http://i35.photobucket.com/albums/d1...nchale/014.jpg

http://i35.photobucket.com/albums/d1...hale/015-1.jpg

http://i35.photobucket.com/albums/d1...nchale/016.jpg

http://i35.photobucket.com/albums/d1...hale/017-1.jpg

http://i35.photobucket.com/albums/d1...hale/019-1.jpg

http://i35.photobucket.com/albums/d1...nchale/022.jpg

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

Thats a Weiand tri power intake manifold with standard Rochester 2 Jet carburetors.

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

So whats it worth?

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

Looks like another rebuilding project for Mr. Jackson...very cool.

wilma

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonL78</div><div class="ubbcode-body">So whats it worth? </div></div>

In my opinion $400-$500.

Re: GM SBC 3 deuce intake carb set-up. Whats it worth?
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Fast67VelleN2O</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonL78</div><div class="ubbcode-body">So whats it worth? </div></div>

In my opinion $400-$500. </div></div>

If the front &amp; back carbs are 2Gs and NOT 2GCs, then I'd value the entire set-up including the linkage at $800 minimum. Rebuild the carbs and you might be looking at $1200 - $1500.
Street Rodders, and especially Tradional Hot Rodders LOVE these things! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] (I have a set-up myself!)

GM (Chevy) made 3x2 intakes for the W motors &amp; the Mark IVs but I've never seen a &quot;GM&quot; 3x2 intake for a SBC.