The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Is this a 1967' 302 engine? (https://www.yenko.net/forum/showthread.php?t=108272)

71-LS6 01-14-2010 04:03 AM

Is this a 1967' 302 engine?
 
My buddy just pulled a small block out of a 57' 210 coupe that he pulled out of a cow pasture. The block & head numbers show to be a 1967 302 or 327 with 2.02 intakes & 1.6 rockers. Is there any way to tell if this was a Z-28 powerplant or did it come from a Corvette?

67L78conv 01-14-2010 04:04 AM

Re: Is this a 1967' 302 engine?
 
are there any numbers stamped on the pad?

SuperNovaSS 01-14-2010 04:08 AM

Re: Is this a 1967' 302 engine?
 
Wait, have you see the valves or are the just 461 heads?



Jason

markjohnson 01-14-2010 04:09 AM

Re: Is this a 1967' 302 engine?
 
Take a quick glance and see if it has the very large, High Perf Harmonic Balancer.

71-LS6 01-14-2010 04:31 AM

Re: Is this a 1967' 302 engine?
 
Block is 3892657, heads 3890462 w / D 2 67 casting date? deck pad VO428HC? I'm not a small block guy and none of these #'s are familiar at all to me. I was just looking for some correct heads on my original block, 327 Camaro.

JChlupsa 01-14-2010 04:54 AM

Re: Is this a 1967' 302 engine?
 
is there a partial VIN stamped on the engine pad?

no HC Engine code for 67/8/9 Camaros and I dont see any HC code for vettes either, could it be HO?
67 Z would have MO or MP engine code not HC

3892657....302.....67....2...Z-28 Camaro
3892657....327.....67....2
3892657....350.....67....2...Camaro

3890462....66-67...302/327/350..Camel hump,no accessory holes,64cc chamber



71-LS6 01-14-2010 05:36 AM

Re: Is this a 1967' 302 engine?
 
He's going to re-check the deck stamping, the balancer, and the pad on the tranny also. They are double hump heads.
Thanks, Steve

Lynn 01-14-2010 06:59 AM

Re: Is this a 1967' 302 engine?
 
HC = 327. 275 horse with a powerglide. Full size car.

SuperNovaSS 01-14-2010 07:21 AM

Re: Is this a 1967' 302 engine?
 
That is what I was thinking it would be. The heads having 2.02 valves it what threw me. I imagine hey were going by casting numbers only. Those heads can have 1.94 or 2.02 valves.

Jason

firstgenaddict 01-14-2010 05:24 PM

Re: Is this a 1967' 302 engine?
 
If you car is a 327 275 then they would be the correct heads. If it is a 327 210 then it would have the lower hp heads.


All times are GMT. The time now is 03:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.