427 Camaro PHR June '68
 

A lot of you guys probably already have this, but for those that don't... enjoy. Check out the sleeper SS with the poverty caps in the background.

http://i962.photobucket.com/albums/a...arArticle1.jpg
http://i962.photobucket.com/albums/a...arArticle2.jpg

http://i962.photobucket.com/albums/a...arArticle3.jpg

http://i962.photobucket.com/albums/a...arArticle4.jpg

http://i962.photobucket.com/albums/a...arArticle5.jpg

http://i962.photobucket.com/albums/a...arArticle6.jpg

Re: 427 Camaro PHR June '68
 

This car still exists. A friend of mine did some restoration work on it years ago.

-Jon

Re: 427 Camaro PHR June '68
 

It's cool that it still had the smog set up on it!

Re: 427 Camaro PHR June '68
 

Does that spoiler look odd... like too narrow?

Re: 427 Camaro PHR June '68
 

looks like a fiberglass deck lid with the spoiler molded into it

Re: 427 Camaro PHR June '68
 

Yes, it's a fiberglass skinned decklid with molded in rear spoiler. It was offered by AMT Corporation's Speed & Custom Division out of Phoenix, AZ.

-Jon

Re: 427 Camaro PHR June '68
 

I noticed that the tie rods and center link are painted black, were were some painted from the factory?

Re: 427 Camaro PHR June '68
 

That's not paint. The center link is forged and they were naturally black (or really dark blue) from the forging process. The tie rod ends were coated with some type of black rust preventative, but supposedly it wasn't really paint, at least that's what I was told. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
I'm sure about the center link though.

Re: 427 Camaro PHR June '68
 

AWESOME!!!! Thanks https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 427 Camaro PHR June '68
 

[ QUOTE ]
The tie rod ends were coated with some type of black rust preventative, but supposedly it wasn't really paint,

[/ QUOTE ]

Many of these parts had Cosmoline covering them when produced. Not really black but rather a dark brown coloring. I still use this today as well as BoeShield.