67 Chevelle Valve Covers, Manifolds, Coil
 

I am looking for a few parts for a 67 Chevelle SS I recently purchased. The car is a survivor, so I need to find nice used or restored parts, no NOS.

Exhaust Manifolds 3909879 and 3909880

Valve Covers for 396/350

Delco Coil 1115242 (Embossed "242 12v" and raised "Delco Remy" on top)

Thermostat housing 3877660 (part # on lip, not neck)

Air Cleaner Assembly

Oil Canister - for PF141 Black embossed

Thanks for the ad space SYC!!
https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Jacquie - don't discount NOS. With shelf wear, 40+ years of gathering patina, and questionable QA during production, they may look just about right on your beautiful '67! https://www.yenko.net/ubbthreads/imag...lins/laugh.gif

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Thanks for pointing that out Sam. I guess I thought anything NOS would look too shiney and new, but you're right. So yes, NOS stuff too!! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

I have located a pair of '67 Chevelle exhaust manifolds that were removed in '68 to install headers. They have been in the guys garage attic since '68. I won't know any dates until he brings them down. He also has the cast iron intake and original carb and possibly the 660 thermostat housing may still be attached. These parts should have less miles on them than your car so they may be a perfect match as far as condition goes. I won't know if they are smog manifolds for a day or two. Clint

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Clint,

Thanks and I have sent you an email.

Jacquie

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Still looking...and I need to add spiral shocks to the list...

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Fronts..rears or all four?
Whats the assembly date of your Chevelle?

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

I need all four. The build date is 10D - 4th Week October, 1966. Thanks!

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Found valve covers and therm housing, still need the rest. Thanks!

Re: 67 Chevelle Valve Covers, Manifolds, Coil
 

Do you need any NOS wheel well moldings? https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/wink.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif