The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Ignition Lock Cylinder Code? (https://www.yenko.net/forum/showthread.php?t=102878)

DarrenX33 01-25-2009 03:59 AM

Ignition Lock Cylinder Code?
 
I have a lock cylinder here and am wondering what the code is on it. It is stamped 7E52. Wondering if that is a date code or the code for the key set. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Seattle Sam 01-25-2009 05:54 AM

Re: Ignition Lock Cylinder Code?
 
[ QUOTE ]
I have a lock cylinder here and am wondering what the code is on it. It is stamped 7E52. Wondering if that is a date code or the code for the key set. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

[/ QUOTE ]

The lock stamp corresponds to the key codes as described on the CRG website -

"As shipped from the GM assembly plant, vehicle keys had a knockout area at the key ring hole that was imprinted with a 4-character code (number/letter/number/number) that correlates to the lock tumbler combination (a 6-digit number described in more detail below). (Only the original keys, and B&S pre-punched factory replacement keys, come stamped with the lock code.)"

more

"The 4-character GM key code (which correlate to the 6-digit tumbler number) was logged by the factory and documented on the broadcast sheets and the documentation provided to the dealer when the new vehicle was delivered. However, they can also be found stamped on many of the locks themselves. On first-generation Camaro they are generally are stamped on the outside of the door and trunk lock cylinder cases, and on the glovebox cylinder plug..."

Click here for a good read. Aren't the guys at Camaro Research Group great? https://www.yenko.net/ubbthreads/imag...ns/worship.gif

bwag 01-25-2009 09:08 PM

Re: Ignition Lock Cylinder Code?
 
From my lock code book that number comes up as a 1970 ignition key "J" blank with a 232234 cut.

DarrenX33 01-26-2009 05:39 AM

Re: Ignition Lock Cylinder Code?
 
Bob thank you very much for posting that. Great info.. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

COPO 70 RS/Z28 01-26-2009 07:15 PM

Re: Ignition Lock Cylinder Code?
 
[ QUOTE ]
was logged by the factory and documented on the broadcast sheets

[/ QUOTE ]

Sam,

Where do they list this on the broadcast sheet??? (im assuming broadcast and build are used interchangeably here)

https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Seattle Sam 01-27-2009 03:40 AM

Re: Ignition Lock Cylinder Code?
 
Again from the CRG web site, look at the center top (example is whited out)

http://www.camaros.org/images/copo/copo1.jpg


All times are GMT. The time now is 09:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.