The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   1969 Double Engine Stamp? (https://www.yenko.net/forum/showthread.php?t=171540)

outlawperformance 04-19-2022 01:14 PM

1969 Double Engine Stamp?
 
1 Attachment(s)
I'm curious about this one I know some strange things happened in the factory. It appears a gang stamp was used and the numbers have consistent spacing. Could this just be a factory double stamp? or someone trying to hide something?
Thanks Steve

Mr70 04-19-2022 01:55 PM

Gang stamp,not gain.

Formula455SD 04-19-2022 02:48 PM

My SD455 is double stamped from the factory.

olredalert 04-19-2022 02:50 PM

----Do you have the opportunity to take the paint off the tab? My old eyes would be able to help more. We need to see the broach marks as well!....Bill S

Stefano 04-19-2022 06:49 PM

Double Stamps / bounced stamps in themselves are not uncommon. I have seen 2 and even three of the same stamp, once on a transmission.

TimG 04-19-2022 09:48 PM

1 Attachment(s)
I have many, many double stamps in my pad library, this is one of my favorites because you keep trying to focus on it as it appears blury. This is a confirmed original stamp correcting a 9 to a 6. It should have been ground and restamped correctly.

Crush 04-20-2022 12:21 AM

Quote:

Originally Posted by TimG (Post 1588835)
I have many, many double stamps in my pad library, this is one of my favoirits because you keep trying to focus on it as it appears blury. This is a confirmed original stamp correcting a 9 to a 6. It should have been ground and restamped correctly.

Out of curiosity, how do you confirm a double stamp?
Thanks

TimG 04-20-2022 12:44 AM

It would go through a Regional or National NCRS event or Bloomington Gold. Any stamp with a question will go to a higher authority. They would look at stamps with an exact same build date and assembaly code and look for VIN numbers surrounding the stamp they are looking at.

MarcDant 04-20-2022 03:25 PM

stamping and broach
 
1 Attachment(s)
Tim are you familiar with cranes corvettes .The w on the first post is different then others i have seen.

David C. 04-21-2022 12:15 AM

1 Attachment(s)
I’ve got this block out of one of my cars. Must have been the new guy.
https://www.yenko.net/forum/attachme...1&d=1650500001


All times are GMT. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.