|
1967 12 bolt rear
3 Attachment(s)
This rear was in an old drag car. According to the assembly stamp, it started life as 3.55 posi. It does have the traction bar bracket. I took the cover off, and this is what I found. Just judging by turning the pinion - I'd estimate 4.88 gears.
|
Ring gear interesting with the corner breaks and deburring . No other mfg stamping on ring gear?
|
That's also going to have c clip eliminators on it.
|
1 Attachment(s)
No other marks that I can see. I need to take it apart.
|
8 teeth on the pinion, count the teeth on the ring gear and divide by 8... 39 on the ring will get you 4.875
|
QP is a 3.07 posi, with metallic brakes. First one I've ever seen.
|
I think Jim Stubbings has had a couple. This one has been modified - perches removed, tubes welded to housing. Not much pitting though.
|
| All times are GMT. The time now is 04:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.