![]() |
motherload found
I went today to pick up some parts from a guy 4 hrs away after our deal he asked me if I wanted to go see a car or two for sale I said ok and we drove 3 miles to look at a couple 55 chevys pretty nice and priced at 20 k he then asked if I wanted to go by a junk yard and I said sure out in the country we went WOW https://www.yenko.net/ubbthreads/imag...lins/smile.gif https://www.yenko.net/ubbthreads/imag...lins/laugh.gif
Camaros chevelles belairs impalas everywhere I counted 30 67-69camaros after I had my truck full of parts the owner said let me show you my cars and inside a old building were https://www.yenko.net/ubbthreads/imag...lins/laugh.gif https://www.yenko.net/ubbthreads/imag...lins/laugh.gif https://www.yenko.net/ubbthreads/imag...lins/laugh.gif 9 more camaros and a @@@@ load of 12 bolts ,big blocks ,muncies ,consoles with gauges etc etc etc gm fenders quaters and boxes with gm parts he didnt know what all he had https://www.yenko.net/ubbthreads/imag...ns/naughty.gifif there is a part you need let me know Im going back later this week ,some stuff he would not price but as with most people cash talks https://www.yenko.net/ubbthreads/imag...mlins/grin.gif or if you want to go see it your self that can also be arranged |
Re: motherload found
Yeah I'm looking for a 69 camaro project i have cash!!
|
Re: motherload found
[ QUOTE ]
some stuff he would not price [/ QUOTE ] Hed fit in perfectly in the Parts for sale section here https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif Right Belair????? |
Re: motherload found
Joey - Were there any good rear window mouldings for a '69 Camaro? I need a full set. If he has one, and you would be willing to ship, I'll pay for your time. Would also be interested in a console for the same car if there is one in good condition.
|
Re: motherload found
You are not far from me, mind divulging the location of the junk yard? I would like to go look around myself...
|
Re: motherload found
I believe there were 6 cars with all glass and molding intact im going back to get all I can this weekend he had 3 consoles but the person that took me got them all they were in a trunk of a car and were 1967 and 2 1969 with gauges Im trying to talk him out of them he just sells parts
|
Re: motherload found
im not gona give the location out just yet https://www.yenko.net/ubbthreads/imag...ns/naughty.gifI will take pics this weekend if I can get back over there here are some of the cars i rember a x44 rolling but rough $4500 a plum 1967 firewall back a white x44 rough several no codes 69 red white yellow no blacks several x 11 all rough several 68 67 that I couldnt get too due to big briars 2 69 convertables one pretty nice bel air not sure of the year several chevelles I dont buy em so I dont know what they are 1 firebird with a hd on hood still has engine and all in it I may try and buy it but unsure what year or its value I dont rember seeing any gto's as I was looking for 396 and 427 stuff
|
Re: motherload found
did you happen to see any 68/69 post chevelles there ??
|
Re: motherload found
Joey, go drop your bank and when your broke pass his name along...I could go for a nice '67 camaro walnut wheel https://www.yenko.net/ubbthreads/imag...mlins/grin.gif.
|
Re: motherload found
one of the cars had a wooden steering wheel but it looked aftermarket to me I called to set up a date for this weekend but he is going to the rod run in gatlinburg so it will be monday before I go back he told me on the phone that he had 35 more acers with cars and that there was around 8 more camaros there
|
Re: motherload found
good hunting...his stuff sounds like it needs to get back in circulation https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...lins/beers.gif
|
Re: motherload found
I am still looking for a 67 bright blue deluxe steering wheel if you come across one. Also, a rectangular radius rod with underbody mount.
|
Re: motherload found
junk yard run postponed until wensday https://www.yenko.net/ubbthreads/imag...emlins/mad.gif im going to take my camera and a video wich I will put on here https://www.yenko.net/ubbthreads/imag...lins/laugh.gif :hmm or should I charge $5 for a link to my video and pics to help pay for my gas and time https://www.yenko.net/ubbthreads/imag...lins/dunno.gif nah it will be free just thought id get your blood pumping
|
Re: motherload found
Joey - If you get me an entire set of rear window trim for my '69 Camaro, I'll pay the gas bill for that trip, shipping, etc.
|
Re: motherload found
[ QUOTE ]
:hmm or should I charge $5 for a link to my video and pics to help pay for my gas and time [/ QUOTE ] As long as the many members can charge you 5.00 for every question theyve answered for you regarding what a part is, what its worth, how many they made https://www.yenko.net/ubbthreads/imag...mlins/grin.gif |
Re: motherload found
That sounds fair https://www.yenko.net/ubbthreads/imag...mlins/wink.gif knowledge is allways worth more than money https://www.yenko.net/ubbthreads/imag...ns/scholar.gif I just need spelling and typing help https://www.yenko.net/ubbthreads/imag...lins/beers.gif Jude will be attending the scavenger hunt with me wensday if all goes well
|
Re: motherload found
[ QUOTE ]
[ QUOTE ] :hmm or should I charge $5 for a link to my video and pics to help pay for my gas and time [/ QUOTE ] As long as the many members can charge you 5.00 for every question theyve answered for you regarding what a part is, what its worth, how many they made https://www.yenko.net/ubbthreads/imag...mlins/grin.gif [/ QUOTE ] https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...ns/worship.gif |
Re: motherload found
its all set we go in the morning jude is bringing his weed wacker I have been kinda not feeling so well so I want do much hunting except for the parts allready asked for were going to try and find the car that the copo motor we bought https://www.yenko.net/ubbthreads/imag...ins/3gears.gifgoes to and the 396 375 hp as well https://www.yenko.net/ubbthreads/imag...lins/crazy.gif
|
Re: motherload found
Lots of cool Camaro's(20 or more) rotting away including a 69 RS(?) Rallye Green X 11. He had 6 nice Camaro's in a barn including a 69 Z28 & 2 Convertibles. He said they were not for sale, but I think one vert could be bought for around 10K without the drivetrain. Also had some NOS quarters for a 67 & about 300 automatic transmissions laying around. I got an AM radio for $50. Thanks, Joey for letting me tag along.
ps Joey's afraid of snakes https://www.yenko.net/ubbthreads/imag...emlins/eek.gif |
Re: motherload found
[ QUOTE ]
Joey - If you get me an entire set of rear window trim for my '69 Camaro, I'll pay the gas bill for that trip, shipping, etc. [/ QUOTE ]he had pulled some rear window trim and is going to put you a set togeather I was sick when we got there so I didnt do much looking |
Re: motherload found
Are there any big block Impalas?
STeve |
Re: motherload found
Thanks. Let me know how much for the gas, trim, and I'll PM my address for shipping.
|
Re: motherload found
I may have some rear window trim, but it's in Iowa. I'll ask Ken to look when he's not too busy.
|
Re: motherload found
ok went back today and picked up the stuff some of you asked for I forgot who to contact so you can contact me
1-1967 am radio 1-1967 12 bolt rear end 1- rear glass molding 1-drivers side astro vent holding piece and cowl vent 1 1969 am fm radio no one asked for it I just bought it because I know there hard to find 1 set with smog and 1 set without smog big block exhaust manifolds every time I go back I find more so if any one else needs something let me know this place is hardly picked over as someone said but the cars do look pretty bad there are a few cars with seats some folding rears speedo and fuel gauges |
Re: motherload found
Is this the 67 12 bolt you bought at the yard?
67 Camaro 12 bolt If so, why does it say it was you Dad's? Also, I thought we figured out hat your Muncie was a M-20. Why is it still advertised as a M-21? Jason |
Re: motherload found
[ QUOTE ]
Is this the 67 12 bolt you bought at the yard? 67 Camaro 12 bolt If so, why does it say it was you Dad's? Also, I thought we figured out hat your Muncie was a M-20. Why is it still advertised as a M-21? Jason [/ QUOTE ] I agree, this is a little wierd. I told Joey I was the one that asked about the AM radio. He responded that I should email him to set up payment. I asked what I was getting as far as knobs, condition, faceplate, price, and he replied several PMs and emails later that he was really busy and would get back to me later. Haven't heard a word. https://www.yenko.net/ubbthreads/imag...s/confused.gif |
Re: motherload found
[ QUOTE ]
THESE WERE PART OF MY DAD WHO HAS PASSED AWAYS COLLECTION [/ QUOTE ] Nice.... |
Re: motherload found
|
Re: motherload found
[ QUOTE ]
Or this one.... Fender Tag [/ QUOTE ] At least the Mopar fender tags are Vinned...sure would've made things easier for 'most of us' now if the General had done this too!. ~ Pete https://www.yenko.net/ubbthreads/imag...lins/beers.gif |
Re: motherload found
[ QUOTE ]
[ QUOTE ] THESE WERE PART OF MY DAD WHO HAS PASSED AWAYS COLLECTION [/ QUOTE ] Nice.... [/ QUOTE ] cant wait to see whats in MY dads tool box !! https://www.yenko.net/ubbthreads/imag...lins/dunno.gif maybe a Z16 https://www.yenko.net/ubbthreads/imag...s/rolleyes.gif |
Re: motherload found
i think joey is a bullsh%t artist,thats what i think.....
|
Re: motherload found
How about we wait for a response from Joey before we jump to any conclusions...
|
Re: motherload found
Wow looks like you folks have been busy bashing me https://www.yenko.net/ubbthreads/imag...emlins/mad.giffirst of all my dad and I have messed with cars for over 25 years and yes I lost him and miss him very much I have sold several items not just car parts and will be selling several more for my mom I could sit down and list parts for a month and still not list it all I just give her the money and she divides between my brothers and sisters I take none of it but thats none of you noisy ******** buisness yes I bought a fender tag and got the whole car to go with it I had been in contact with the seller by phone and email and had bought from him before it had 1 good door and window rails glove box ash tray wiring etc the body and frame were wasted I left the tag and body with the seller he will proubally re sell it and thats none of your buisness either as far as the fellow who wanted the radio I never asked you for any money and you cant provide a email or pm with that fact I only told you how much one would proubally cost and to email me dirrectly because I was busy and still am I am currently cutting hay to feed my cattle and horses and dont have the time to get on here and put up with this kind of bs like I told you I am very busy right now ,Thanks charlie for trying to straighten them out I would not have even been on here to see this if I hadent gotten a phone call from a friend on here Im a little pissed he didnt respond https://www.yenko.net/ubbthreads/imag...lins/blush.gifoh and the 67 posi rear end that came from the junk yard was sold to jammie livingston in noble georgia go lok his number up your self I dont have the time the transmission is a m21 not a m20 thats why the description is the way it is now just like someone else got told go piss up a tree
|
Re: motherload found
That was what I was hoping to hear.
|
Re: motherload found
|
Re: motherload found
Reread my post. I said you sent me a PM saying "email me to set up payment". I can provide a copy of that if needed.
When I asked about condition and price, it took several emails from me to get a response from you that said "Im extremely busy". I have not heard from you since. I am not upset, but all that I have said is FACT. |
Re: motherload found
Joey must be a real busy guy, he never responded to my PM when I inquired about parts he had for sale either.
|
Re: motherload found
Geez leave the guy alone. It seems alot of people on this site are ready to de-bunk someone else and call their finds bogus or to put someone down.
|
Re: motherload found
i for one i,am speaking up about the remark i made about joey,had no right making it,was none of my business,sorry joey
|
All times are GMT. The time now is 09:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.