12 bolt and M-21...
 

Looking for a 12 bolt and M-21 for my newest project...69 Nova...multi-leaf...prefer something close to home...thanks.

wilma

Re: 12 bolt and M-21...
 

Believe Chuck may have a 12 bolt...

Re: 12 bolt and M-21...
 

12 bolt... hmm...

Tom, I have a 12 bolt out of a '67 Chevelle... I don't know if it will fit but I am looking to off load it...

-Dan

Re: 12 bolt and M-21...
 

[ QUOTE ]
12 bolt... hmm...

Tom, I have a 12 bolt out of a '67 Chevelle... I don't know if it will fit but I am looking to off load it...

-Dan

[/ QUOTE ]

Allow me to preface by stating that I'm not trying to be a butt-inski here, but you might consider that those `66-`67 Chevelle 12 bolts are kinda difficult to find...it'd be kind of a shame to carve one up to fit something else.

Should Tom pass on it, would you mind shooting me the details on it?

Thanks. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Eric

Re: 12 bolt and M-21...
 

Dan...thanx...send it to eric...i don't want to have to refab...67-69 camaro..68-72 nova 12 bolt will do it for me..tw

Re: 12 bolt and M-21...
 

Go with the 8.5" corp. 10 bolt rear from '72+ = plenty strong.

Re: 12 bolt and M-21...
 

M, been looking into that idea...might be easier and less expensive....some guy on Steve's site builds a nice turn key unit for about $1100...all new parts ready to go...

wilma

Re: 12 bolt and M-21...
 

Yep, for a FunRunner, it's becoming the economic way to go!

Re: 12 bolt and M-21...
 

if you dont do axels Randy's ring and pinion does them for about $850.00 for a 10 bolt all fresh with new posi etc,I am going that way on one project as well, man I wish you were closer I have a 73 Z 3;73 10 bolt cheap.

Re: 12 bolt and M-21...
 

70-73 F rears are a different size than the 67-9 F and 70-72 X bodies...
427 King has a couple of extra 70 nova 12 bolts...

Re: 12 bolt and M-21...
 

Wilma,
I might have M-21 for you. I am converting my wifes Camaro to an automatic. I have a deal pending now, but haven't heard back from the guy. If it falls through are you interested?

Scott

Re: 12 bolt and M-21...
 

Let me know...I would be interested...thanks..

wilma

Re: 12 bolt and M-21...
 

How about a Ford 9" and a Jerico? https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 12 bolt and M-21...
 

I have a 10 bolt posi for $550 its in georgia at my home right now it would proubally cost $150 shipping its a good rear end I just bought it this weekend at a local guys house and its still in my pickup bed

Re: 12 bolt and M-21...
 

He left a deposit last night, if it falls through I'll let you know

Re: 12 bolt and M-21...
 

Found a 12 bolt today...still looking for an M21 trans..will also need a driveshaft, bell housing, cluth setup, etc...thanks!

wilma

Re: 12 bolt and M-21...
 

Are you looking for a perticular date M-21???
I also have several set of 1967-68 Camaro pedals if they'll work... Crash
[email protected]

Re: 12 bolt and M-21...
 

did you look at the guy who sells gone through Muncies on ebay for about 875..he has good feedback and seams like a honest guy, or call up crash???

doh! crash posted the same time I did, https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 12 bolt and M-21...
 

Crash..sent you an email...tom

Re: 12 bolt and M-21...
 

Tom, I didn't get your E-mail... Crash

Re: 12 bolt and M-21...
 

I have an M-21, 50,000 original miles, never been opened.
Out of the '74 Z28 show car we are converting to T56. We were planning to have it checked over by a qualified tranny guy and put it on Ebay.
Email me if interested [email protected]