'67 Camaro Parts Wanted
 

Updated list for my project car. Car is dated 07B and would like parts in that time frame, however since the car is going to be a driver, I will consider other dates if priced attractively.

AM radio
3910 Carb
1100693 alternator
Rear alternator bracket for a '67/'68 Z-28
5460346 "WT" Master Cylinder
DF Wheels - '67 or '68 dates only please. Will also consider YS and DC wheels.
Small block exhaust manifolds 3892679 and 3840912
Mint trunk lid
822 or 6764 steel crank - just found out that mine is toast
Standard '67 and earlier small block rods

Thanks in advance https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

Sorry forgot a few parts:

hood springs
hood latch - male part that attaches to hood
fan shroud mounting plate that attaches to rad support
fender braces that mount on fenders and rad support (yes, my car got the full '70's underhood chrome treatment https://www.yenko.net/ubbthreads/imag...lins/smile.gif )

I have a really nice GM cowl hood if anyone needs one to trade only for any of this stuff - pick-up only on the hood

Thanks https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

Are '67 327 rods the same? I have a bunch with pistons. Let me know if you're interested.

Re: '67 Camaro Parts Wanted
 

Yes Tony, if they are the stock '67 327 small journal 2 inch rods with 11/32 bolts then they are the same. I don't need the pistons obviously, but could use a nice set of rods if you want to part with them. Please let me know if you do and how much you want for them. Thanks https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

Mark,what is a 3910 carb worth today? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif I might put one on mine but I think the price might be outta reach for one.

Re: '67 Camaro Parts Wanted
 

Ron, I see them restored from $750 to $950. Hey, you gonna put a tank crank in your car https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: '67 Camaro Parts Wanted
 

Mark, I'll PM you.

Re: '67 Camaro Parts Wanted
 

no I have found another,correct crank.

Re: '67 Camaro Parts Wanted
 

[ QUOTE ]
Ron, I see them restored from $750 to $950. Hey, you gonna put a tank crank in your car https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

[/ QUOTE ]
send me that link so I can read that listing again,he said after I emailed him that it was a tank crank. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: '67 Camaro Parts Wanted
 

Thanks Tony https://www.yenko.net/ubbthreads/imag...lins/beers.gif Don't need the rods anymore guys, Tony helped me out.

Ron, I'm the one who told him that the application he had was from a military application. I found the number on the Moretec site. I don't have the auction bookmarked, but do a search under 283 crank and it comes up.

Re: '67 Camaro Parts Wanted
 

ok mark.I didnt bid on it and im wondering how you knew i was asking about it?

Re: '67 Camaro Parts Wanted
 

Mark I found it. https://www.yenko.net/ubbthreads/imag...s/rolleyes.gifnow i see my question on top.NO im not interested in it but it is a new piece.If you see a bidder named BUDBREWER1 that is my ebay user ID.

Re: '67 Camaro Parts Wanted
 

If I was sure about the fit for the timing gear etc. I'd buy it, but I don't want to ship it up here and find out that something won't work on my 302.

What motor is in your car now, Ron?

Re: '67 Camaro Parts Wanted
 

well the one that was in the car (a 512 cast #) was a 302,it has a large journal steel crank,11:1 alum pistons,press in pins built just like a 68 302 with the correct cam (solid lifters) all gm stuff https://www.yenko.net/ubbthreads/imag...lins/dunno.gif just didnt have a 302 casting number on block,go figure that one huh.I even have the recipt from a chevy dealer for the CE engine when it was bought in 71.I also have the correct MO 67 block that I would rather put in,It has all the numbers and is date coded for my car but is a bare block and im trying to find parts for it.It is at the machine shop now getting cleaned up.Oh I might have someone for you to call about those exhaust manifolds with the correct part numbers,he is returning my call in a few min and I should know something soon.

Re: '67 Camaro Parts Wanted
 

Thanks Ron!

Re: '67 Camaro Parts Wanted
 

Mark,do you know the correct part number for the 67Z starter? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif I dont think mine is original but the date seems correct.

Re: '67 Camaro Parts Wanted
 

Mark,lmk how you made out with the shadetree guy https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

[ QUOTE ]
...correct part number for the 67Z starter?

[/ QUOTE ]

Hi Ron. Attached is a copy of my 67 Z pre-registration for the 2004 Nationals. These are the important numbers they're looking for at the highest levels of judging. Starter # and date is shown on the page:

http://67z28.net/images/67%23s.gif

Re: '67 Camaro Parts Wanted
 

Thanks for the call Ron and for the leads! I'll let you know how I make out. Mark

Re: '67 Camaro Parts Wanted
 

Denis,

A 3998207 water pump? I don't think I have seen one of those before. I believe it should be the 3859326, no?

-Jon

Re: '67 Camaro Parts Wanted
 

[ QUOTE ]
Denis,

A 3998207 water pump? I don't think I have seen one of those before. I believe it should be the 3859326, no?

-Jon

[/ QUOTE ]

Both are correct, but I think mine is more correct per MacNeish (i.e. he wrote the book, sold me the water pump, and judged the car):

http://www.67z28.net/images/waterpump.gif

Re: '67 Camaro Parts Wanted
 

Thanks Denis,My alt and starter are WRONG! SIGH! well more parts to look for https://www.yenko.net/ubbthreads/images/graemlins/no.gif

Re: '67 Camaro Parts Wanted
 

Denis,Its something how close the options are on your car and mine,my tag is, L 2lgsr 4l 5y C-2 paint. You got the tinted windsheild but what I cant understand is why would they put deluxe seat belts in mine with a standard 760Z int? weird huh. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: '67 Camaro Parts Wanted
 

A few changes...Updated list for my project car. Car is dated 07B and would like parts in that time frame, however since the car is going to be a driver, I will consider other dates if priced attractively.

AM radio
3910 Carb
Rear alternator bracket for a '67/'68 Z-28
5460346 "WT" Master Cylinder
DF Wheels - '67 or '68 dates only please. Will also consider YS and DC wheels.
Mint trunk lid
Oil filler tube with PCV provision
Chevrolet script valve covers - must be mint for chroming
Monoleaf spring perches
hood springs
hood latch - male part that attaches to hood
fan shroud mounting plate that attaches to rad support
fender braces that mount on fenders and rad support (yes, my car got the full '70's underhood chrome treatment )

I have a really nice GM cowl hood if anyone needs one to trade only for any of this stuff - pick-up only on the hood

Thanks https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

Mark,did you get the crank off of shadetree? Oh lets see a pic of the lucky project car https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Re: '67 Camaro Parts Wanted
 

No Ron, my engine builder had one with rods, so that made it a lot easier for me. Shadetree wants $100, but they are on vacation and can't get the numbers from it for another week.

Here is a pic when I first found it...

Re: '67 Camaro Parts Wanted
 

Here's the interior...

Re: '67 Camaro Parts Wanted
 

Nice! car with deluxe int and gauges!! Is it a real black car? If so our cars would look neat sitting next to each other with the opposite paint scheme.Any idea how many black cars are on the reg? https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: '67 Camaro Parts Wanted
 

Thanks Ron. Yes, it's a real black car, deluxe interior, tach/gauges, fold-down seat, exterior chrome, rear speaker, rear defogger, 4.56 posi, tinted glass, was told it had an am/fm radio originally but haven't confirmed that yet. I'd love to own a white and black RS in the future...I think one of each would be very cool! No, I don't know how many black cars are in the registry, but I know it is a fairly rare color.

Re: '67 Camaro Parts Wanted
 

Mark,did the 67 302 engines have the engine pull brackets from the factory? If so how were they mounted.

Re: '67 Camaro Parts Wanted
 

Ron, none that I have owned had them and I believe that this topic was discussed on one of the web sites last year and the concensus was that they were not delived with engine lift hooks.

Re: '67 Camaro Parts Wanted
 

Mark you have a PM

Re: '67 Camaro Parts Wanted
 

he also has an alternator date coded 7c27

Re: '67 Camaro Parts Wanted
 

Mark does your motor still have the canister oil filter? What # filter is the correct one for the 302?

Re: '67 Camaro Parts Wanted
 

No Ron, long gone. I have no idea what the number is, but they are a dime a dozen on ebay. Mark

Re: '67 Camaro Parts Wanted
 

[ QUOTE ]
No Ron, long gone. I have no idea what the number is, but they are a dime a dozen on ebay. Mark

[/ QUOTE ]
Anyone know? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: '67 Camaro Parts Wanted
 

AC filter # PF141 for the filter that goes in the can.

Dont know the can pt #.

Re: '67 Camaro Parts Wanted
 

This PF-141 setup is what you want:

http://images.corvette-paragon.com/3644K_full1.jpg

Best place to get it is Paragon Reproductions who'll sell you a reconditioned assembly as seen in the photo for $125, complete with element and silk-screened text on the canister.

Re: '67 Camaro Parts Wanted
 

mark...I think I sent you a PM on valve covers. If you didn't get it let me know.

Re: '67 Camaro Parts Wanted
 

Thanks Tony!