![]() |
`70 LS6 project car on ebay
Not mine, don't know anything about it, just stumbled over it on a routine search, thought I'd post it here in case anyone might be interested.
LS6 Chevelle |
Re: `70 LS6 project car on ebay
I hope someone buys it to restore, it would be a shame to see it get parted out.
|
Re: `70 LS6 project car on ebay
Nice car and description. I would like to see a better pic of the engine stamping without the head gasket covering the adjacent area.
|
Re: `70 LS6 project car on ebay
This LS6 has alot of potential, and I hope it will be saved and preserved. Great description of the car and what parts he does have for a restoration. Even though it sounds like it is a matching #'s LS6, I would definately look it over in person before I bid on it.
Too bad the block has been decked some. The seller sounds like he is half-way honest, which is refreshing now days. This is the only part of the car's description I didn't like. "Protect-O-Plate long gone but I have a blank NOS (not repro) plate and NOS tape for it. You'll have to get it stamped." |
Re: `70 LS6 project car on ebay
tony, i do not have a problem with a reproduction pop for a real documented car. Documenting a fake car with a reproduction pop is NOT OK, is my opinion. Roger
|
Re: `70 LS6 project car on ebay
I understand what you are saying, and respect your opinion. Wether it is a documented car or not, I think it is unethical to restamp POP's and cowl-tags, just not my thing.
When he states that he has a reproduction POP that can be stamped, then I think it gives people who are not well educated in the musclecar hobby the impression that it is ok to restamp tags, POP's. |
Re: `70 LS6 project car on ebay
This is one of those instances where critical opinion is good...block stamp, build sheet etc..
|
Re: `70 LS6 project car on ebay
[ QUOTE ]
...b;ock stamp, buils sheet etc.. [/ QUOTE ] Take a break and go pour some Sanka https://www.yenko.net/ubbthreads/imag...mlins/grin.gif By the way, you welcome https://www.yenko.net/ubbthreads/imag...mlins/wink.gif |
Re: `70 LS6 project car on ebay
You should use spellcheck Sam
|
Re: `70 LS6 project car on ebay
[ QUOTE ]
You should use spellcheck Sam [/ QUOTE ] I caught you red handed, even winding your new Yenko watch https://www.yenko.net/ubbthreads/imag...mlins/grin.gif |
Re: `70 LS6 project car on ebay
Very https://www.yenko.net/ubbthreads/imag...mlins/cool.gif Project that I hope it rings the bell.
Just a pet peeve of mine,is the phrase "Stripe delete". This would bring one to think it was originally built with them. How can you delete something that it never had in the first place. https://www.yenko.net/ubbthreads/imag...s/confused.gif If anyone is interested,I am available to go look at this Chevelle for them. |
Re: `70 LS6 project car on ebay
Wow 25100 already!
|
Re: `70 LS6 project car on ebay
Hmmmmm...........Anyone know if GM changed the block stamp fonts for 1970, as compared to original 1968 & 1969 fonts??
Just curious as they differ from 2 of my original blocks. ---- Thanks, Rick |
Re: `70 LS6 project car on ebay
That VIN stamp on his engine & trans looks typical in size & location for Kansas Leeds plant.
They were unique. |
Re: `70 LS6 project car on ebay
Thanks MR70. Cooool car. Amazing so much of it is still together (with the car). Too many solid lifter (any BBC for that matter) were easily scattered from heavy right feet. LOL
---- Rick |
Re: `70 LS6 project car on ebay
Have seen some very nice finished LS-6 cars for $50K range recently. You'd be closer to $100K in that one once you were done if restored correctly.
|
Re: `70 LS6 project car on ebay
Charlie, please forward all info about very nice restored LS6 cars for 50K to me ASAP. The really nice ones are bringing in the 100 area right now up here.
|
Re: `70 LS6 project car on ebay
I would have to agree with sixtiesmuscle,The ones i have seen selling in the 50k range,need a restoration.
|
Re: `70 LS6 project car on ebay
[ QUOTE ]
Charlie, please forward all info about very nice restored LS6 cars for 50K to me ASAP. The really nice ones are bringing in the 100 area right now up here. [/ QUOTE ] Correct one's are 50-100K restored..then all you need is the car https://www.yenko.net/ubbthreads/imag...mlins/wink.gif |
Re: `70 LS6 project car on ebay
Mike, you've got to come down south where we don't have all those salt problems and the city slickers bidding them up. Seriously, I have seen 3 nice #2 LS-6 cars in the last 6 months that were in the $50-$55K range. 2 were autos, one was a 4 speed and all had buildsheets.
|
Re: `70 LS6 project car on ebay
[ QUOTE ]
all had buildsheets [/ QUOTE ] Why do so many LS 6's have buildsheets ??? |
Re: `70 LS6 project car on ebay
COPO, You need to start buying these cars and selling them to me..Id buy every #2 Condition LS6 out there for $50k to $55k and smile the whole way to the bank.. I havent seen a nice one sell for under 85k in the past 2 months..The last couple of nice ones that I know both bought just over 100k.
|
Re: `70 LS6 project car on ebay
I did a quick ebay search, and as a close example found a matching #, 4 speed car with 2 buildsheets, older 90's concours frame-off resto sold at $65K. http://cgi.ebay.com/ebaymotors/Chevrolet...bayphotohosting
Here is another one, older resto LS-6, 4-speed car sold for $45K on EBAY in June. http://cgi.ebay.com/ebaymotors/ws/eBayIS...p;category=6164 These 2 examples are from EBAY for cars that were available to the masses. The point is there are deals out there if you look around, are patient, and purchase from a private party. The LS-6 cars are relatively plentiful and every nice LS-6 coupe has not been selling for $100K+ though certainly some apparently have. last one: Here's a fresh resto, matching #'s w/buildsheet sold on this site for low $70's one week ago. https://www.yenko.net/ubbthreads/show.../page/2#162209 |
Re: `70 LS6 project car on ebay
[ QUOTE ]
[ QUOTE ] all had buildsheets [/ QUOTE ] Why do so many LS 6's have buildsheets ??? [/ QUOTE ] I'd buy one if you have a spare! https://www.yenko.net/ubbthreads/imag...lins/dunno.gif |
Re: `70 LS6 project car on ebay
A guy I know in the Twin Cities bought that car instantly for the 65k..He stole that car!! anyways it is in Wisconsin now and he sold it right away for 97k. And that was an older resto..
|
Re: `70 LS6 project car on ebay
Yours must have been built when the printers were broken because most of them now have them flying out of every crevice of the interior and front sheet metal when you open the windows !! https://www.yenko.net/ubbthreads/imag...mlins/haha.gif J/K all you LS 6 dudes.
|
Re: `70 LS6 project car on ebay
Yep. Demand controls supply!
Of the original 4275 LS-6's built......... Only around 6000 still exist! https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif |
Re: `70 LS6 project car on ebay
Ancient thread but my reply is legit as i am the one that purchased the car in 2005.
Have some great photos and documentation of the resto that is underway if anyone is interested. If starting a new thread on this else where is the right thing to do iI would need some guidance on this. Thanks, Ian |
Re: `70 LS6 project car on ebay
No wonder i have not seen this thread, it is 8 years old [img]<<GRAEMLIN_URL>>/naughty.gif[/img]
|
Re: `70 LS6 project car on ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Z15 SS 454</div><div class="ubbcode-body">Have some great photos and documentation of the resto that is underway if anyone is interested.
If starting a new thread on this else where is the right thing to do iI would need some guidance on this. Thanks, Ian </div></div> Of course we are interested. Start a new thread and post some pictures and if you need guidance on posting we will certainly help you. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] |
Re: `70 LS6 project car on ebay
Ok, I will do that when I get back to NH.
In Ft Myers beach Fla enjoying the red tide :thumbsdown: Guess its better than the feet of snow we have had in the last 3 weeks. Look forward to posting next week when I'm back to so called reality. |
Re: `70 LS6 project car on ebay
I had to chuckle at the 6000 remaining of the 4257 built! Kinda reminds me of the hundreds of LS-6 Conv. sticks of the supposed 16 or 19 built. And one better is the overwhelming supply of "REAL" '70 W-30 Conv. sticks----way more than the general ever thought of producing.
|
All times are GMT. The time now is 04:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.