Engine pictures
 

Well, I finally started taking the engine apart to see what damage there was. I pulled the intake and found one broken push rod on the #6 cylinder. I then started removing spark plugs. The electrode on the #6 one looked like it had been hit by something. I decided to remove the head from that side. Here is what I found. The engine is still in the car since I didn't have anyone here to help me remove the hood.
James

Pushrod http://i16.photobucket.com/albums/b1...at/ENGINE2.jpg

#6 cylinder. https://www.yenko.net/ubbthreads/images/graemlins/no.gif
http://i16.photobucket.com/albums/b1...at/ENGINE3.jpg

Re: Engine pictures
 

Yikes! Looks like it was rotting out from the inside but there might have been something like a coolant leak into that cylinder that caused it to hydrolock and blow out the cylinder wall? I saw someone else do that to a small block this summer, but that was a 900+ hp race motor so you can't compare what happened or why it happened. Time for a new motor! I say stick with a 427 and make it look like a 396.

Re: Engine pictures
 

[ QUOTE ]
I say stick with a 427 and make it look like a 396.

[/ QUOTE ]

Thats what I would do too. Detail it all the same... could have some real fun with this car!

Re: Engine pictures
 

James,

Keep my 512 Block in mind. https://www.yenko.net/ubbthreads/imag...lins/smile.gif


Jason

Re: Engine pictures
 

Well time for a new motor is certainly an understatement! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif

Sorry I gave you false hope before...lets hope my DZ302 fairs better! https://www.yenko.net/ubbthreads/imag...s/rolleyes.gif

Re: Engine pictures
 

John,

Did you get the PM I sent you?


Jason

Re: Engine pictures
 

-------Did someone say 502???..........Bill S

Re: Engine pictures
 

They must have whispered it cause I didn't hear them. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif I think I'm going to build another 427. I have always been partial to the 427s. Maybe I'll built the only 68 Beaumont COPO in existance. Numbers matching of course. https://www.yenko.net/ubbthreads/imag...ns/naughty.gif Anybody got Bain's number???? https://www.yenko.net/ubbthreads/imag...lins/smirk.gif
James

Re: Engine pictures
 

James, really sorry about your engine, I hope you'll be able to get things rolling again. .....Kasey

Re: Engine pictures
 

The previous owner of my old Harrell Camaro told me stories of the many times it had seen 10K RPMs! 8000 is very do able. It is when you let off of the 427s that you have problems.


Jason

Re: Engine pictures
 

Jason,

Got it and responded.

Sure hope my 302 doesn't look like this inside...YIKES! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...emlins/eek.gif

Take care,

John

Re: Engine pictures
 

I hope it doesn't too. This is the engine that was in the car when I bought it. I have never been happy with it's performance and planned to rebuilt or replace it this winter. Looks like I'll get an early start on it.
James

Re: Engine pictures
 

there is a supposed LS6 longblock on the cheap on ebay may be worth a look James.

Re: Engine pictures
 

Well..keep thinking positive....man that thing is toast https://www.yenko.net/ubbthreads/imag...lins/crazy.gif

Re: Engine pictures
 

I am thinking positive. I'm positive it's toast. https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif
James

Re: Engine pictures
 

OUCH !!! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/images/graemlins/no.gif that 396 definately can't be rebuilt.like everyone has mentioned go with the 427 you'll enjoy that engine more.

Re: Engine pictures
 

[ QUOTE ]
I hope it doesn't too. This is the engine that was in the car when I bought it. I have never been happy with it's performance and planned to rebuilt or replace it this winter. Looks like I'll get an early start on it.
James

[/ QUOTE ]

My sediments exactly.Bought this car used and one never knows what they are truly getting.Motor ran great until this so now it's time to build a killer roller-cam 302...if the motor is salvageable that is.

If not,here comes that monster crate motor (that aluminum head Bill Mitchell 427 small block is starting to look real good! https://www.yenko.net/ubbthreads/imag...ns/naughty.gif)to rip up the pavement until I figure which side is up on this whole 302 thing.

Re: Engine pictures
 

Thanks Bud, There are a couple engines on Ebay that I'm watching. One of them is a LS-6. I'm not sure if it's the one you mentioned.
James

Re: Engine pictures
 

How about...
web page

I know it's a little pricey, but I think it might be fun.