Almost FREE parts...donate to SYC there yours.
 

I have flat ran out of room...you can have the part for the listed price by donating that amount to SYC.

if that price is to much say so..bottom line this stuff is out of here!!! and I would rather see it saved to a person that needs it, than melted down in China.

if it needs to be shipped, FED Ex ground has been best lately, just pay actual shipping fee's.

1957 SBC 4bbl intake, 3731398 - date C 29 57 $10

1968 SBC 4bbl intake, 3827184 - date K 13 8 $10

1965 SBC cast iron dist,Clean, 1111015 - date 3 C 15 $10

1960 SBC 283 shortblock 3756519 date C 12 0 suff-F07I8C
no vin stamp. one freez plug out, I dont see any cracks by the plug hole??? has the big factory oil pan also, $20

1971..??? BBC valve covers guy said they came of his kids stock 71 Chevelle..who knows they do have many tabs welded on them for wiring and such.. surface rust on the inside of them and a few very slight pecker dings. $5

Chevelle lakewood traction bars, missing one of the housing clamps. $25

3 spd trans no linkage or bellhousing, side cover 3852645, case 3925847, tail 326558, GM53, vin-17L604140. dont know anything about it, was laying on the ground under a tarp, I grabbed it for the linkage. free

new out of the box rear gas schocks from the 67 Caprice. $5

restoring a old house!!! Call Norm! Box full of misc Skeleton locks, knobs, hardware..etc $5

pile of old GM point dist's no interesting numbers, good for parts?? $5 each

pile of GM Alt's no interesting numbers, $5 each dont ask for a 837..send what amp you need and I will see whats there.

1970 Camaro steering wheel??? black has two cracks on the back side at the spokes on the flat surface the common crack area.. easy fix, bad part the rim is beat to sh&! with ring knicks??? I honestly think if ya worked around it with 500 wet paper you can save it and not deal with one that has the gapping cracks.#9752603 date M 8 1, $10

dinged D spoke Cragars, good for the garden hose $10

70 Nova 4BBL air cleaner $10

come haul this stuff off...oh bring Beer!.

Bud. https://www.yenko.net/ubbthreads/imag...elairSucks.gif


https://www.yenko.net/attachments/130698-stuff1.JPG

Re: Almost FREE parts...donate to SYC there yours.
 

1 https://www.yenko.net/attachments/130699-stuff4.JPG

Re: Almost FREE parts...donate to SYC there yours.
 

Locks/shocks

Re: Almost FREE parts...donate to SYC there yours.
 

Block

Re: Almost FREE parts...donate to SYC there yours.
 

4bbl Air cleaner, SS 70 Nova ???

Re: Almost FREE parts...donate to SYC there yours.
 

Cragars

Re: Almost FREE parts...donate to SYC there yours.
 

Bud, Please HOLD those Big Block valve covers until I can see BETTER pics...different angle , rear flattened corner...
Thanks, Chuck S Renton, WA

Re: Almost FREE parts...donate to SYC there yours.
 

Is that a SMOG pump in front of that Red Bin?
How badly bent is the Steering Wheel..pix?
I'm in line behind Chuck on those VCovers.

Re: Almost FREE parts...donate to SYC there yours.
 

It's not a '70 Nova four barrel air cleaner, but I'll take it. Send me an email to: [email protected] to settle up. Thanks!

Re: Almost FREE parts...donate to SYC there yours.
 

Nice gesture on your part Bud! You are killing two birds with one stone. Helping SYC members out with parts at a very reasonable price or even free, and helping the SYC out. Thanks! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Almost FREE parts...donate to SYC there yours.
 

I know I'll probably regret asking this, but what the heck is a "pecker ding"? https://www.yenko.net/ubbthreads/imag...lins/laugh.gif

https://www.yenko.net/ubbthreads/imag...mlins/flag.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: Almost FREE parts...donate to SYC there yours.
 

CHUCK !!!!! Their 5.00 and you want better pics ????????
Nice gesture Budnate...we thank you..

Re: Almost FREE parts...donate to SYC there yours.
 

[ QUOTE ]
Bud, Please HOLD those Big Block valve covers until I can see BETTER pics...different angle , rear flattened corner...
Thanks, Chuck S Renton, WA

[/ QUOTE ]

Charley old Chuck is a good guy..he just runs at a different frequency than us, bottom line Chuck is a hard core car guy...did I just say that???..wow I am getting soft in my old age.... here ya go Chuck, ya goof... ps, I am pretty these are the good ones..I wanted to see how fast you and Rick could type a reply.... https://www.yenko.net/ubbthreads/imag...lins/beers.gif I like Miller Lites..and so does Denis https://www.yenko.net/ubbthreads/imag...mlins/wink.gif


https://www.yenko.net/attachments/130739-stuffvc.JPG

Re: Almost FREE parts...donate to SYC there yours.
 

here is a nice clean tach that is supposed to work, with mount..send'em $20.00

Re: Almost FREE parts...donate to SYC there yours.
 

sds

Re: Almost FREE parts...donate to SYC there yours.
 

Rick just for you buddy....

smog numbers to crunch..I want a full report in 10 Min...if you positively identify it, its yours FREE. if you get stuck I will give ya the pulley number....last post has another set of numbers to work with.......GO!

Bud. https://www.yenko.net/ubbthreads/imag...ffSucksToo.gif

Re: Almost FREE parts...donate to SYC there yours.
 

what are those valve covers, the one with the breathers on them and how much thanks jp

Re: Almost FREE parts...donate to SYC there yours.
 

Sorry JP those are going on the wall...gotta build a Milner coupe someday...unless you have three window coupe to put them on.

Re: Almost FREE parts...donate to SYC there yours.
 

[ QUOTE ]
gotta build a Milner coupe someday

[/ QUOTE ]

Now you are talking Bud! https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Re: Almost FREE parts...donate to SYC there yours.
 

[ QUOTE ]
I know I'll probably regret asking this, but what the heck is a "pecker ding"? https://www.yenko.net/ubbthreads/imag...lins/laugh.gif

https://www.yenko.net/ubbthreads/imag...mlins/flag.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

[/ QUOTE ]

Eddie I e mailed ya ding...check it and let me know. Bud

Re: Almost FREE parts...donate to SYC there yours.
 

another stab at the tach...operator error do not pass go... send'em 15 bucks.

https://www.yenko.net/attachments/130765-stufftach.JPG

Re: Almost FREE parts...donate to SYC there yours.
 

Thanks for the pix.Not interested in a #132 pump,but they do make nice door stops.

Re: Almost FREE parts...donate to SYC there yours.
 

roger that... in the trunk with the other scrap metal it goes...Rick why dont ya find a home for the complete 68 sb system I have..put it into a loving home for a dead president your way.

Re: Almost FREE parts...donate to SYC there yours.
 

Ok, I now know what a "pecker ding" is https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif I probably could have comfortably lived out the rest of my years without knowing, but the knowledge is now visually seared into my brain and for that, Bud, I salute you! https://www.yenko.net/ubbthreads/imag...s/headbang.gif (I know, I know, but I just had to ask https://www.yenko.net/ubbthreads/imag...mlins/flag.gif.)

Re: Almost FREE parts...donate to SYC there yours.
 

I need belair to fuzz out part of it and post it..when's the last time ya saw a 6' bunny and a pink playboy bunny together...easter is almost here... https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: Almost FREE parts...donate to SYC there yours.
 

Bud, Ya saved me the drive just to SEE your valve covers..Thought(wrong)they might have been same as L-78 without chrome...Gladly buy ya some beer soon enough.....
Must be nice to have Charlies "spare" time to go to and from without SEEING pics first.....
love and kisses, Chuck