Slotted Mag Wheels - GM Bolt Pattern, 15x7 and 15x8
 

Looking for a set of slotted mags!
Preferably in the Metro Detroit area, but shipping is possible.

Fitment:
2nd gen Camaro (1970-81) - GM 5x4.75 lug pattern

Sizes:
15x7 fronts
15x8 or 15x8.5 rears

Brand not important, but prefer GM bolt pattern vs unilug.

I'll look around for you - shouldn't be too hard to find.

I have a pair of 15 x 8.5's if you're interested. I'm a couple hours south of Detroit. direct drill chevy b.p.

Thank you! I didn't think so either, but after a few months it's tougher than it seems to find a pair in decent shape. I missed out on an NOS pair of 15x8.5s, but the 15x7s are more common. However most seem to be 14s

That would be great, I'm definitely interested. I will send you a message

Still looking!

To clarify sizing-

15x7 fronts with 4.25" or 4.5" backspace
15x8 or 15x8.5 rears with 4.25" or 4.5" backspace, maybe 5" BS but would rather not go that far

Thanks!

Those Ansen wheels look promising.

Personally I would not consider a unilug unless the wheel were hub-centric, made to fit.

If your looking for Fenton gyro fronts 15 x4
Gm pattern 4.75 I have a set and 15x8 rears (but they are a different brand )

Man, that Ansen set sold before the seller replied.

I'd definitely consider Fenton Gyros but I'd like to get a matching set, plus I imagine shipping from Boston to Detroit wouldn't be cheap!

Ansens
 

I Private Messaged you some pictures on direct bolt Ansens 15 x 7 and 15 x 8.5 if you are interested. Thanks, Mike

Don't know if you have your heart set on staggered.
Here is a set of 15x7. Not too far from me. Surprised you haven't found a set yet. Seem to come up often.

https://www.facebook.com/marketplace...44787153%22%7D

Life got in the way a bit but back on the hunt for these wheels!

Finding 15s with the correct BS is harder than anticipated. Worst case I'll buy some new from US Mag