The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   1969 396 engine value? (https://www.yenko.net/forum/showthread.php?t=161567)

McCune 06-03-2020 12:17 AM

1969 396 engine value?
 
3 Attachment(s)
I have a 1969 396 that is in a 72 Blazer that his rough very rough. I think this is a passenger car engine? Can someone confirm and a value would be nice to know before I sell the truck too cheap. Thanks for any help.

Jim

William 06-03-2020 12:20 AM

Passenger car 396 2 barrel/TH400.

BLACKLS5 06-03-2020 12:42 AM

I just sold a 1969 396 CE engine that ran but had a lower end noise for $500.00 and it took some time to sell but I was going to keep it as a spare for any less. Do you have the top or passenger seat for the Blazer? A friend has a '69 and needs both but would buy a complete truck if the price was reasonable.

McCune 06-03-2020 01:02 AM

2 Attachment(s)
No, it is pretty sad.

scuncio 06-03-2020 01:11 AM

By Michigan standards, that's pretty clean.

bbbentley 06-03-2020 01:15 AM

Quote:

Originally Posted by scuncio (Post 1501807)
By Michigan standards, that's pretty clean.

:beers::haha:

If that tailgate is good and the same as a fleet side ( looks to be), I could really use one, please.

Tommy 06-03-2020 01:18 AM

hunting truck! It's not used up yet

Tommy

big gear head 06-03-2020 01:36 AM

Isn't that a '70 alternator bracket?

McCune 06-03-2020 01:43 AM

Quote:

Originally Posted by big gear head (Post 1501815)
Isn't that a '70 alternator bracket?

I looked at that bracket and was wondering?

ssl78 06-04-2020 03:11 AM

Also a 1970 power steering set up

AnthonyS 06-04-2020 04:49 AM

Quote:

Originally Posted by ssl78 (Post 1501952)
Also a 1970 power steering set up

I think that's the 71 or 72 and up upper PS adjuster with that square hole for adding belt tension with a breaker bar - the first year (70) ones didn't have that for sure. And that reservoir is not the original (to 1970 or even 1969) banjo type - it's newer / a likely OTC reman unit. IMHO.

Still likely has value to someone though. (that is the one year only 70 upper alternator bracket) Be interesting to see if the lower is flat or creased.

Cheers all.

bbbentley 06-04-2020 10:24 AM

Quote:

Originally Posted by AnthonyS (Post 1501960)
...Be interesting to see if the lower is flat or creased.

Cheers all.

2nd pic has a good angle to see lower. Clearly flat.

TAR6569 06-04-2020 12:42 PM

Checked my database, didn't have anything on that partial vin on the pad. Janesville car

RALLY 06-04-2020 01:44 PM

Quote:

Originally Posted by McCune (Post 1501798)
I have a 1969 396 that is in a 72 Blazer that his rough very rough. I think this is a passenger car engine? Can someone confirm and a value would be nice to know before I sell the truck too cheap. Thanks for any help.

Jim

Good old 396 2 bbl engine. Low horsepower, good torque and used for pulling. I understand this engine was used in some 69 Impala's back in the day also. No big value on the 396 engine. I bought one years back just to build a 396. Cast crank, 148 open chamber heads, forged rods, nothing special.


All times are GMT. The time now is 11:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.