Pitman Arm - Power Steering #3953227.
 

LOCATED - THANKS SYC! I'm looking for a nice Pitman Arm for a 69 Camaro with Power Steering. Casting # is 3953227. The center to center measurement is 5 3/4" and the spline opening is 1 1/8" diameter. Please PM if you have one available. Lloyd.

I have an NOS one with the gm tag and sleeve on it.
3953227

I'm just leaving town and I"ll be back Wed morning.

Pitman Arm
 

PM Sent.

After Lloyd is taken care, I could use the same arm, but he ask first...Thank you, Joe

Still looking, turns out the NOS Pitman Arm Ken (cdn454ls6) had was for a manual steering box. Great part, just won't fit a PS box. Please post if you have one for a PS box. Thanks.

Lloyd

Located!
 

Found a nice one, thanks SYC (and EM)!

https://live.staticflickr.com/65535/...092f8214_c.jpg

Congrats. Now I need to find one..Joe

Hi joe i am going to see a 67/69 camaro guy tomorrow i will check to see if he has any pitman arms.

Ok thanks. Same thing, it has to be for power steering...Joe

Will keep my eyes open for another one Joe. I received a couple of responses to the post however they were for manual steering boxes. Difficult to distinguish between them without taking measurements due to the common casting number. The only definitive way is measuring the spline hole diameter.