Hurst Competition plus for 69 nova
 

I am looking for a good used competition plus for my bench seat 69 nova with a Muncie.thanks

Re: Hurst Competition plus for 69 nova
 

I may have one. Will check and send a pic, will let you know. Its off my 72 Nova.

Re: Hurst Competition plus for 69 nova
 

Are you looking for linkage also ? Or just the comp plus shifter....? I have a complete setup that is 3 years old ... bought new at Jegs It was used very little because I switched to the ram rod setup . I also have some older comp plus shifters only ...please check the application ...mine came out of my 69 Camaro ....bench seat 69 Nova may be different. Doug. 614-203-1272

Re: Hurst Competition plus for 69 nova
 

Sorry,for being so vague,late night in the garage last night.im needing complete setup.im wanting the aftermarket hurst completion plus,with my car being bench seat,the shifter comes straight up with no offset.thanks

Re: Hurst Competition plus for 69 nova
 

Crash you have a hot one!!!!

Re: Hurst Competition plus for 69 nova
 

I thought that would be the case .

Re: Hurst Competition plus for 69 nova
 

This shifter is sold

http://www.chevelles.com/showroom/data/500/IMG_0706.JPG

Re: Hurst Competition plus for 69 nova
 

Is this a big block car or small block???

Thanks... Crash

Re: Hurst Competition plus for 69 nova
 

It's a big block car

Re: Hurst Competition plus for 69 nova
 

My hurst shifter is straight up. I will let you know.

Re: Hurst Competition plus for 69 nova
 

Hurst after market shifters for 1967-69 Camaros, and 1968-72 Novas are all based off the small block location of the transmission...

The big block is moved forward 1/2" and to the right 5/8", and that why Hurst after market Camaro and Nova shifters don't fit without some modifications...

I've been playing around on my surface plate I built, that will hold up to 4 complete empty 4-speeds perfectly inline with each other horizontally and all on the same vertical plane...

I finally came up with a shifter mount and spacer to fit the shifter in the correct location for the big block Camaros and Novas...

The bench seat shifter you need is Hurst #391-6848(which uses stick #6836) and install kit #373-7131(small block) or I can put a complete install kit together for the big block...

The shifter in the picture above looks to have a #4106 handle thats used with the console shifter...

If you need a complete shifter and install kit, I have everything in stock...

Hope this helps... Crash [email protected]

Re: Hurst Competition plus for 69 nova
 

I have an old C/P Hurst in my 70 L78 Nova bench car, it fit fine and bolted right in. You can mess around a bit with shifter handles. Mine has a bit more "forward tilt" to it (less of a straight up look as the one in the above pic). Just my preference and it clears everything nicely. I suppose you have more leeway in a bench car set up,than a console. If anybody wants a pic or P/N let me know. Thx SULLY

Re: Hurst Competition plus for 69 nova
 

Shifter found. Thanks SYC and Bill Rose for the great deal!