3 barrel holley info
 

Does any one on the board restore or have gaskets ?for
These? I have found the bowl and jet plate gaskets
It has gear drive
And squirter mods I want to keep it
That way I have found some of the
Gaskets but not all
Thanks Dave

Re: 3 barrel holley info
 

Holley 3-406 kit, still available.

Re: 3 barrel holley info
 

They may have to make the kit,some times stuff this old is not on the shelf. They may not have one on every shelf in all cities. Hope this helps. Holley 3-406 Kit, I got one {not for sale}. pm me for info.

Re: 3 barrel holley info
 

Thanks
One more question
Carb is missing its secondary
Throttle return spring
I need one that will
Work for it......
Ordered a rebuild kit online ......

Re: 3 barrel holley info
 

Secondary throttle return spring? [img]<<GRAEMLIN_URL>>/hmmm.gif[/img]

Not sure what you're referring to there.

Re: 3 barrel holley info
 

Guessing he means one of these.

Re: 3 barrel holley info
 

That spring is for a mechanical secondary carb, there's no provisions to mount it on a vacuum secondary carb. Besides, if the carb is gear drive, the primary &amp; secondary throttle shafts are 1-1 so there should be no need for a secondary return spring. The secondary shaft should close via the gear drive as the primary side closes.

Re: 3 barrel holley info
 

So the primary spring closes all three barrel for a leak-free seal.

Re: 3 barrel holley info
 

Correct.

Re: 3 barrel holley info
 

I dunno
The guy I bought it from
Told me it needed that spring
( like the one in the picture)
I have never owned a 3 barrel
Holley before ......
So doing this one is
All new to me ....
I remember these holleys
From the guys cars where I grew up
As a kid .....always wanted one ...

Re: 3 barrel holley info
 

If you can post some pics (or email them to me), I'll try to help.

Re: 3 barrel holley info
 

Got the pics. As was stated, it's got a gear drive conversion on the pass. side, so a conventional return spring on the primary side will suffice.

I would advise replacing the primary throttle blades, however; whoever drilled bypass holes in them drilled the holes in the wrong place, and unless the carb is going on something with a pretty wild cam, you'll have trouble getting it to idle correctly.

Re: 3 barrel holley info
 

Thanks for the info..
Would you be able to restore
This for me?
What other holley model carbs use
The same primary blades??
I've only got the one 3 barrell

Re: 3 barrel holley info
 

Dave;

I replied to your email.

The primary blades are the same as an 850, no problem there.

Eric