Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Selling a clean set of original big block Chevy M/T polished aluminum valve covers. As you can see, these are in super nice shape, and have never had oil in 'em. They could use a little hand polishing from sitting around for years, but will clean up easily and will look great on any "Day 2" project.

First $200.00 plus $20.00 US shipping!

Take a look:

http://i83.photobucket.com/albums/j2...f/P3270004.jpg

http://i83.photobucket.com/albums/j2...f/P3270003.jpg

http://i83.photobucket.com/albums/j2...f/P3270002.jpg

http://i83.photobucket.com/albums/j2...f/P3270001.jpg

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Hey Joe, If they have enough clearance for roller rockers I will take them! Thank you Richard.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

They are quite a bit taller than stockers, so I'm pretty certain they work with roller rockers without any problems. Richard our PM box is full... e mail me at [email protected]

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

If they don't clear the rockers you can alway's use some aluminum valve cover spacers. Have the on my car with the same valve covers shown(except mine are black ) & they look really cool.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

The roller rockers will hit the drippers and break them off. thats what happened to mine.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Yep, and they're kinda' rare with the drippers still in them. Use spacers and keep the drippers on such a nice set.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Never heard back from RARE Z/28, so these appear to still be available.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Joe - pm sent

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Sorry Joe for not getting back right away! I have been putting in crazy hours getting ready for my construction season. As long as the valve covers will clear the rockers using a thicker gasket I will take them. They are not for me, they are for a friend and that is why I am asking. Thanks Joe.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Sorry RARE Z/28, I tried to send you a PM but your box was (and still is) full and your e mail is not listed in your profile. When I didn't hear back from you for several days I assumed you decided against them. Quite honestly am not sure they would have worked for your friend without modifying/removing the dripper tabs, or by using cast aluminum spacers anyhow.

They have since been sold pending payment.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Remember our posting guidelines. Inappropriate posting removed.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

And how does that comment help?

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Rich,
I almost did not respond to your comment however I somehow felt compelled. These valve covers were not for me as indicated, they are for a dear friend who has been trying to build his car for twenty three years. He has gone through some real tough times in his life and never had the time or money to complete the car. In addition to that he has always put everyone else in his life first! I was doing my best to try and help. Joe has always been very good to deal with. I have purchased parts from him before and always been very pleased with the description and purchase. This time I happened to be a little late. No worries, it is nobodies fault and we will eventually get a set to fit his chevrolet big block. Next time you offer advice lazy dick, consider that whom you are speaking to may not care to hear it!

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Keep a patient eye on eBay. BBC M/Ts in good condition for a similar price to what Joe was asking are on there all the time. Some just need a good polish to look as good.

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

I may have a few sets to sell...Let me look in my loft and see what I have. No worries! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

P.S....clean out yor PM's
Dave
67 Nova Boy

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

hey richard,

ken and i have an extra set of MT's we will donate to your friends project, service to someone else is always in style, especially on easter sunday https://www.yenko.net/ubbthreads/imag...lins/smile.gif e-mail me a list of other parts your friend has a need for and ken and i will check our parts stash. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

...and that's why https://www.yenko.net/ubbthreads/imag...ouguysrock.gif

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Thank you so very much Alan & Ken,
You guys have been fantastic! My friend John will be ecstatic to hear how generous you both have been. Happy Easter to everyone and thank you to all who have offered to help. You guys truly are what this hobby is about!

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

[ QUOTE ]
...and that's why https://www.yenko.net/ubbthreads/imag...ouguysrock.gif

[/ QUOTE ]

x2 https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

x3

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

[ QUOTE ]
hey richard,

ken and i have an extra set of MT's we will donate to your friends project, service to someone else is always in style, especially on easter sunday https://www.yenko.net/ubbthreads/imag...lins/smile.gif e-mail me a list of other parts your friend has a need for and ken and i will check our parts stash. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

[/ QUOTE ]

Very cool Alan! Happy Easter to you and yours!

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

What a nice gesture! Thumbs up!

Re: Day 2 BBC Mickey Thompson Valve Covers-Nice!
 

Nice way to help take some of the sting away Alan & Ken.http://www.greensmilies.com/smile/sm...ns_thumbs1.gif