The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Garages/shops.. (https://www.yenko.net/forum/forumdisplay.php?f=136)
-   -   New shop (https://www.yenko.net/forum/showthread.php?t=178980)

Too Many Projects 01-28-2025 01:42 PM

Quote:

Originally Posted by big gear head (Post 1665330)
Thanks for asking. It's getting better, but not quite 100% yet. I've got a Dr appointment Thursday, and I'm expecting him to send me back to work on Monday. I'm going to try to put up a few boards in the shop today to get ready for the ceiling joists. Maybe soon I can post some updated pictures. I was able to get some LVP flooring pretty cheap for the living area. Someone local had a bunch that they didn't use and it was just enough to cover what I needed. I got a new Atlas 9000 pound 2 post lift. It's still on my trailer parked in the shop. I'm going to try to get the packing material off of it today to inspect it and see what it's going to take to get it unloaded.

:hmmm:, it's only three more day's Freddie, you've been diligent about letting this heal, hang in there...:biggthumpup:

big gear head 01-29-2025 12:37 PM

2 Attachment(s)
I didn't have pictures yesterday for my other post.

big gear head 01-30-2025 01:26 PM

I just wanted to mention Race Tools Direct. I ordered this Atlas lift from them and they were very good to work with. They delayed the shipping to allow my shoulder to heal some before I had to deal with this. On the day it was delivered it was pouring down rain. I had made arrangements with someone to have it unloaded with a fork lift. The guys were having a hard time getting it out of the truck and they turned it over, damaging the hydraulic unit. I was going to try to fix it myself since it wasn't the fault of the truck driver or Race Tools Direct. When I couldn't find the parts that I needed I contacted Race Tools Direct to see if they could get the parts for me. Instead of getting me the parts, they sent me another complete hydraulic unit, and they paid the shipping both ways! If you are looking for a lift I recommend checking with Race Tools Direct. https://racetoolsdirect.com/?gad_sou...saAmcvEALw_wcB

big gear head 09-05-2025 10:47 AM

1 Attachment(s)
I wish I had more to report, but work on the shop is going very slow. I finally have air conditioning (now that summer is almost over). Now I have to wait on the plumber to come back and run gas lines to the units. I did realize that I hadn't posted pictures of the living area lately. I'll try to get that done soon.

dykstra 09-05-2025 10:49 AM

I was wondering about your shop. Thanks for the update.

1967 4K 09-05-2025 12:28 PM

I like those blocks you set your units on. Look good.👍

big gear head 09-06-2025 01:35 PM

3 Attachment(s)
Quote:

Originally Posted by 1967 4K (Post 1678808)
I like those blocks you set your units on. Look good.��

Thanks. I wanted to get the units up off of the ground so grass wouldn't get into them when mowing, and water wouldn't get into them when it rained really hard. It took me a little while to build them and get the concrete in them. That's not my kind of work.

I don't think I posted any pictures of the apartment after getting the OSB on top and on the shop side wall. I'm not a carpenter, but I think it turned out alright. Most of the plumbing is done, but I still have a lot of wiring to do and then insulation and drywall.

AnthonyS 09-06-2025 04:40 PM

Looks great!


All times are GMT. The time now is 03:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.