Re: Thread about undercoating removal
 

New poster here. A couple of winters ago, I stripped off the undercoating from the underside of my 69Z. I used "Aircraft Paint Stripper" from Auto Zone. It was very agressive, but did the trick. You paint it on heavy with a brush, and then scrape off the material after 5-10 mins. In most places, I had to do this 2-3 times to get off all of the undercoating. Once I finished, I used paint thinner to remove all oils, etc off of the finished areas. I'll post before and after pictures later today

Re: Thread about undercoating removal
 

Welcome Rob. Post some pics of that Z. You have a few of us here who are out in your neck of the woods.

Re: Thread about undercoating removal
 

Here is before

Re: Thread about undercoating removal
 

And after

Re: Thread about undercoating removal
 

Here is my car, which now has Tourqe Thrusts

Re: Thread about undercoating removal
 

Nice detail job, Rob...Welcome to the site! https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Thread about undercoating removal
 

Thanks Bruce. It took me about 10 weekends to remove the undercoating. I've had the car for about 9 years.

Re: Thread about undercoating removal
 

Maybe we should consider all the guys on the site from Chicago meeting up a few times at one of the cruise nites....hope there's room for us all !!!

Re: Thread about undercoating removal
 

Rob you have a neigbor very close by with nearly the exact same car. " Alan X77 Hugger " where are ya? Hmm. Small world.

Bob, the season opener of Lombard was outstanding last year. I plan to be ready with the car no later than that show. Let's do it!!

Re: Thread about undercoating removal
 

When is the opener ?